User manual PYRAMID PW1077X DATASHEET

[. . . ] In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Step 1 Checking the contents of the box or Digital camera Strap LI-70B Lithium Ion Battery F-2AC USB-AC adapter USB cable AV cable Other accessories not shown: warranty card Contents may vary depending on purchase location. PYRAMID Setup CD-ROM Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 12) "Shooting, Viewing, and Erasing" (p. 19) Step How to Use the Camera Step Printing "Camera Settings" (p. [. . . ] This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. PRINT ORDER*1 Changing the printer's settings for printing [CUSTOM PRINT] *1 1 2 3 [PRINT ORDER] is available only when print reservations have been made. "Print Reservations (DPOF)" (p. 51) Follow Steps 1 and 2 in [EASY PRINT] (p. Use FG to select the print mode, and press the H button. PRINT MODE SELECT PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER EXIT MENU SET OK 4 Use FG to select [SIZE] (Submenu 3), and press I. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer's standard. PRINTPAPER SIZE STANDARD BORDERLESS STANDARD BACK MENU SET OK 48 EN 5 Use FG to select the [BORDERLESS] or [PICS/SHEET] settings, and press the H button. Submenu 4 Application The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. To make the detailed printer settings 1 Use FGHI to select the setting, and press the H button. PRINT INFO <x DATE FILE NAME P EXIT MENU 1 WITHOUT WITHOUT OFF/ON*1 (The number of images per sheet varies depending on the printer. ) *1 SET OK Submenu 5 Submenu 6 <× 0 to 10 WITH/ WITHOUT Application This selects the number of prints. Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. The available settings for [BORDERLESS] vary depending on the printer. If necessary, repeat Step 4, and then press the H button when finished. Use FG to select the [X] (date print) screen option, and press the H button. The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data Follow Steps 1 and 2 in [<] (p. Use FG to select either [<] or [U], and press the H button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK MENU SET OK Use FG to select [SET], and press the H button. 3 Use FG to select [RESET], and press the H button. EN 53 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Press the q button to switch to the shooting mode. Wait until #(flash charge) stops blinking before taking pictures. Troubleshooting Battery "The camera does not work even when batteries are installed". Insert recharged batteries in the correct direction. "Inserting the battery and the SD/SDHC memory card (sold separately)" (p. 12), "Charging the battery and setting up using the supplied CD" (p. 13), "Charging the battery with the supplied USB-AC adapter" (p. 15) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. [. . . ] Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. Any defect that occurs due to exhausted batteries, etc. Any defect that occurs due to sand, mud, etc. entering the inside of the product casing. [. . . ]