User manual PYRAMID PW1586-X DATASHEET

[. . . ] In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. Checking the contents of the box or Digital camera Strap Lens cap and lens cap strap Lithium Ion Battery (LI-50B) USB cable (CB-USB8) AV cable (CB-AVC3) USB-AC adapter (F-2AC) PYRAMID Setup CD-ROM Other accessories not shown: Warranty card Contents may vary depending on purchase location. Names of Parts Camera unit 1 1 Flash 2 AF illuminator Self-timer lamp Microphone Lens Card slot Battery/card compartment cover 7 Tripod socket 8 Strap eyelet 9 Speaker 2 3 4 3 4 5 6 5 8 6 7 9 EN 2 3 1 2 8 9 10 4 5 6 7 1 2 3 4 5 6 12 13 14 7 8 9 10 11 12 13 14 Monitor button R button (record movies) q button (switching between shooting and playback) A button (OK) Wheel controller INFO button (changing information display) button (erase) E button (menu guide) Connector cover Multi-connector HDMI micro connector Indicator lamp Zoom lever Shutter button n button 11 Attaching the camera strap and lens cap 1 2 3 4 5 · Attach the strap to the other eyelet in the same manner. Pull the strap tight so that it does not come loose. EN 3 Monitor Shooting mode display 1 25 24 23 22 21 20 19 18 2 P 0. 0 WB AUTO ISO AUTO 00:34 4 14M NORM DATE 3 4 5 6 7 8 9 1 Battery check. . . . . . . . . . p. 16, 23 3 Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 19 Flash standby/flash charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. [. . . ] Languages On To resume standby mode Press any button. EN 47 Setting the date and time [X] [X t (Settings 3) X "Date, time, time zone, and language" (p. 15). To check the date and time Press the INFO button while the camera is turned off. The current time is displayed for approx. 3 seconds. Choosing home and alternate time zones [World Time] t (Settings 3) World Time You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X]. Submenu 2 Home/Alternate x *1 Submenu 3 x z -- -- Application The time in the home time zone (the time zone selected for x in submenu 2). The time in the travel destination time zone (the time zone selected for z in submenu 2). Select the travel destination time zone (z). z*1, 2 *1 *2 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on. When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z). 48 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. screen. ) Back MENU Set OK 10 Use FG to select [Print], and press the [Print Info] screen is displayed. File Name A button. When [Option Set] is selected in [All Print] mode, When printing is finished, the [Print Mode Select] screen is displayed. Print Mode Select P To crop an image [P] [P 1 Use the zoom lever to select the size of the cropping frame, use FGHI to move the frame, and then press the A button. Print All Print Multi Print All Index Print Order Exit MENU Set OK To cancel printing Cropping frame 1 Press the button while [Do Not Remove USB Cable] is displayed. 2 Select [Cancel] using FG and then press the A button. Set OK 2 Use FG to select [OK], and press the A button. 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [Single Print]. 11 Press the button. 12 When the message [Remove USB Cable] is displayed, disconnect the USB cable from the camera and printer. EN 51 Print Reservations (DPOF*1) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. DPOF reservations set by another DPOF device cannot be changed by this camera. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. 4 5 No Use HI to select the image for print reservation. Use FG to select the [X] (date print) screen option, and press the A button. Submenu 2 Application This prints the image only. [. . . ] When this Warranty Certificate is not returned with the product. When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. [. . . ]