User manual QED VECTOR

[. . . ] -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Other companies and product names are the trademarks or the registered trademarks of each company. [. . . ] ) Video board and display driver: VGA (640 × 480 pixels), 65, 536 colors or more displayable. Hard disc space: 20MB or more (When installing both MD Editor 2 and Label Maker. ) CD-ROM drive Serial port: 1 or more OS : Windows 95/Windows 98 (This software does not run on Microsoft Windows 3. Set up the serial port that is to be used for this kit so that it is unavailable to the other softwares. To verify that the serial ports of your computer are enabled, call the vendor of your computer. Check to make sure that you have received the following supplied items with the MD Editor 2. If anything is missing, please contact the shop where you purchased this unit or your nearest Sony dealer. Connection for controlling the MD deck from your computer Use the supplied connector and monaural (2P) mini-plug cord to connect your personal computer to the MD deck. Match the orientation of the connectors and insert the plug deeply into the matching connector then secure the plug with the retaining screws on both sides of the plug. Different brands of personal computers refer to their RS-232C serial terminals with different terminal names. For further information, refer to the instruction manual of your computer. English version of on-line manual is automarically installed when you install MD Editor 2. To install another language version, do the procedure below to overwrite the English version with the language version that you select. You must install the Adobe Acrobat Reader in your computer in order to open the on-line manual. If you do not need the MD Editor 2, Label Maker, or Adobe Acrobat Reader, uninstall the software as follows: " Uninstaller starts up and the software selected in step 3 is deleted automatically. If you uninstalled the Label Maker from the computer in which the PictureGear software is already installed, it become impossible to print labels through the PictureGear as well. If this happens, uninstall the PictureGear, and then reinstall it. If the softwares listed below are already installed in your computer, do not start them up while the MD Editor 2 is active. softwares for controlling the MD deck · MD Editor Supplied with the PCLK-MD1 personal computer connecting kit, or the MD deck MDS-PC1 which includes a personal computer connecting kit. Starting up the MD Editor 2 with any of these programs active will result in a malfunction. If you are using several CD-ROM drives, you may need to select the drive to be used for playing music CDs before starting up MD Editor 2. Selecting the CD-ROM drive 1 On the desk top, double-click "My Computer, " double-click "Control Panel, " and then double-click "Multimedia" to display the "Multimedia Properties" window. [. . . ] The connector from the computer adapter is not connected properly to the serial port of the computer, or connected to a port that is not selected during serial port setup. n Check the connector for normal connection. The monaural (2P) mini-plug cord from the computer connector is not connected properly to the MD deck, or MD deck power cord is not connected to a power outlet. n Check the monaural (2P) mini-plug cord for normal connection. [. . . ]