User manual QTEK 9090

[. . . ] Pocket PC Phone 2 Pocket PC Phone User Manual Please Read Before Proceeding THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE'S OUTER CASING. [. . . ] Enter the username and password you use to log on to your ISP, and then click Next. Enter a name for this connection, and then Next. Select No when the installation wizard asks you to set up an Internet mail account, and then click Next. 10. After the installation is completed, click Finish. Settings on your Pocket PC Phone You need to complete these actions before you start using the Wireless Modem on your Pocket PC Phone: n A GPRS SIM card is inserted in your Pocket PC Phone. n Disable the ActiveSync com port connection of your PC. n Disable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam. n Insert your Pocket PC Phone to your PC/Notebook by Serial connection (using the optional serial sync cable). Tap the Start menu > Programs > Wireless Modem. Select the Serial connection type from the drop-down list and insert the synchronization cable adapter. Make sure that you have connected your device with a serial sync cable if you choose Serial connection to a notebook or PC, tap Start. Now you can start to dial the new dial-up connection you have created by tapping Start > Settings > the Control Panel > Network and Dial-up Connections on your PC. Getting Connected Connecting via USB Port As with the connection via serial or IrDA, you need to check the following below before you start using the Wireless Modem on your Pocket PC Phone via USB connection: n A GPRS SIM card is inserted in your Pocket PC Phone. n Disable the ActiveSync com port connection of your PC. n Disable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam, and then uncheck Receive all incoming beams. 86 Pocket PC Phone User Manual n Insert your Pocket PC Phone to your PC USB connection (using the USB sync cable or cradle). Before setting up an USB modem, you must verify that you have the two files, USBMDM and USBModem_Dialer, on the Pocket PC Phone Companion CD. Insert the Companion CD into the CD-Rom of your PC and perform the settings as follows: 1. Tap the Start menu > Programs > Wireless Modem. Select the USB connection type from the drop-down list and insert the USB cable adapter. Tap the Start button on the Wireless Modem screen of your Pocket PC Phone. A Found New Hardware message will pop up on your desktop PC. Select the Display a list of the known drivers for this device so that I can choose a specific driver option, and then click Next. Select Modem from the Hardware types list, and then Next. Click the Have Disk button, and then Next. Select the recognized USB Modem in the Models list, and then Next. After the installation is completed, select Finish. [. . . ] Adjust the touchscreen to respond more accurately to screen taps. Tap the Start menu > Settings > the System tab > Screen > Align Screen. For your Pocket PC to recognize your handwriting input with the stylus, you need to use Transcriber writing. To learn how to write in Transcriber, see Chapter 2. n Inaccurate response to stylus taps. Troubleshooting n Pocket PC does not recognize handwriting. ActiveSync Problems Problem n ActiveSync operation cannot be performed or connected. Solution 1 2 3 Make sure the ActiveSync cradle/cable is connected securely. [. . . ]