User manual QTEK S100

[. . . ] Pocket PC Phone 2 Pocket PC Phone User Manual Please Read Before Proceeding THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE'S OUTER CASING. [. . . ] Select Standard Modem Types in the Manufacturers field, select Standard 33600 bps Modem, then select Next. screen appears, click Finish to go back to the Modem tab mentioned in Step 2. Now you can see a Standard 33600 bps Modem in the modem list. Highlight the modem you just created, click the Properties button, and select the Advanced tab. Enter the complete string in the Extra initialization commands: field: AT+CGDCONT= 1, "IP", "APN", "", 0, 0. Remember to click the Change Default Preferences button after entering the required string as mentioned above. Click the General tab and set the Float control by selecting None from the drop-down list. Keep pressing OK until the modem installation wizard exits. A new standard modem is now set up successfully on your PC, but you still need to create a new dial-up connection: 1. Click Start > Settings > Control Panel > Network and Dial-up Connections > Make New Connection. To continue, tap Next. 102 Pocket PC Phone User Manual 3. Enable the option I want to set up my Internet connection manually, or I want to connect through a local area network (LAN) button, and Next. Select I connect through a phone line and a modem option, and then Next. Enable the Use area code and dialing rules checkbox and enter the telephone number *99#, and then Next. Enter the username and password you use to log on to your ISP, and then click Next. Enter a name for this connection, and then Next. Select No when the installation wizard asks you to set up an Internet mail account, and then click Next. After the installation is completed, click Finish. Connecting via USB Port As with the connection via IrDA, you need to check the following below before you start using the Wireless Modem on your Pocket PC Phone via USB connection: n A GPRS enabled SIM card is inserted in your Pocket PC Phone. n Disable the ActiveSync com port connection of your PC. n Disable the Infrared function by tapping the Start menu > Settings > the Connections tab > Beam, and then uncheck Receive all incoming beams. n Insert your Pocket PC Phone to your PC USB connection (using the USB sync cable or cradle). Before setting up an USB modem, you must verify that you have the two files, USBMDM and USBModem_Dialer, on the Application CD. Insert the Application CD into the CDRom of your PC and perform the settings as follows: 1. Tap the Start menu > Programs > Wireless Modem. Pocket PC Phone User Manual 103 2. [. . . ] Tap the Start menu > Settings > the System tab > Screen > Align Screen. n Pocket PC Phone does not recog-nize handwriting. For your Pocket PC Phone to recognize your handwriting input with the stylus, you need to use Transcriber writing. To learn how to write in Transcriber, see Chapter 2. ActiveSync Problems Problem n ActiveSync operation cannot be performed or connected. 1 2 3 Pocket PC Phone User Manual 191 Solution Make sure the ActiveSync cradle/cable is connected securely. Make sure you have installed the ActiveSync software included on the Companion CD. [. . . ]