User manual QUANTUM 81-81422-02 A01

[. . . ] DLT-V4 Product Manual Guide, 81-81422-02 A01, November 2005, Made in USA. Quantum Corporation provides this publication "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. COPYRIGHT STATEMENT Copyright 2005 by Quantum Corporation. [. . . ] Locate the entry for the DLT-V4 tape drive. Then double-click that entry to display the Drive Properties. The "Hardware Update Wizard" will start. Proceed with step 3. d e 3 Select "Install from a list or specific location (Advanced)". 4 In the next view, ensure that the option "Search for the best driver in these locations" is selected. Then clear the "Search removable media" box and instead select "Include this location in the search". 5 Click Browse . . . , and select the folder where you saved the driver files. Then click OK. DLT-V4 Product Manual 32 Chapter 2 Installing the Tape Drive Installing the Device Drivers 6 Click Next to install the driver. You may be prompted to reboot your system. The DLT-V4 device driver is installed. Microsoft Windows 2000 2 1 Make sure that you are logged on to the server or workstation with Administrator privileges. 2 Download and extract the required driver files from www. quantum. com. 3 The system may automatically detect the DLT-V4 tape drive and display the "Found New Hardware Wizard". If the Wizard appears, proceed directly to step 4, otherwise start the Wizard manually as follows: a b c Right-click My Computer, and select Manage from the drop-down menu. This will start the Computer Management applet. In the left window under System Tools, double-click Device Manager. In Device Manager, the DLT-V4 tape drive will be listed under either "Tape drives" or "Other devices". Locate the entry for the DLT-V4 tape drive. Then double-click that entry to display the Drive Properties. The "Upgrade Device Driver Wizard" will start. Proceed with step 4. d e 4 In the "Upgrade Device Driver Wizard", click Next to continue. 5 Select the radio button labeled "Display a list of the known drivers for this device so that I can choose a specific driver". 6 If the drive is unknown to the system, the next view is "Hardware Type". Otherwise, the "Select a Device Driver" view is displayed. a If the "Hardware Type" view appears, select either "Other devices" or "Tape drives". Then click Next to continue on to the "Select a Device Driver" view. In the "Select a Device Driver" view, click Have Disk . . . . b DLT-V4 Product Manual 33 Chapter 2 Installing the Tape Drive Installing the Device Drivers 7 At the "Install From Disk" view, click Browse . . . , and then locate the folder where you saved the driver files. Select the "QntmDLT. inf" file in that folder, and click Open. 8 At the "Install From Disk" view, verify that the drive letter and path shown are correct. [. . . ] RoHS mandates that new electrical and electronic equipment put on the market does not contain lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls (PBB), or poly-brominated diphenyl ethers (PBDE). S SAN Storage Area Network. SATA Serial Advanced Technology Attachment. A Serial ATA International Organization (SATA-IO) standard for the interface between a computer and peripheral controllers. An American National Standards Institute (ANSI) standard for the interface between a computer and peripheral controllers. [. . . ]