User manual QUANTUM ATL 7100 UNPACKING INSTRUCTIONS V3 REL 1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM ATL 7100. We hope that this QUANTUM ATL 7100 user guide will be useful to you.
Lastmanuals help download the user guide QUANTUM ATL 7100.
Detailed instructions for use are in the User's Guide.
[. . . ] 1 August 2001
Introduction
0
This document explains how to unpack the crate containing the Quantum|ATL 7100 Series library, an automated storage and retrieval system (see figure 1). After completing the instructions in this booklet, perform the set up procedure using the instructions in the Quantum|ATL 7100 Series Library Facilities Planning and Installation Guide.
Figure 1 Quantum|ATL 7100 Series Library
Optional Cable Cover0
The Quantum|Quantum|ATL 7100 Series library may include an optional cable cover. The cable cover ships in a separate box strapped on top of the Quantum|ATL 7100 Series crate. For information on this optional item, refer to the Quantum|ATL 7100 Series Cable Cover Installation Instructions in the cable cover shipping box.
Introduction
3
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. [. . . ] Do not place static-sensitive parts on a metal surface. Place them inside their protective shipping bag or on a grounded antistatic mat. Avoid touching connectors and other static-sensitive components. Keep library doors and access panels closed whenever possible.
Note:
· ·
Dry climates and cold-weather heating environments have lower relative humidity and are more likely to produce static electricity.
6
Preparing for the Installation
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. 1 August 2001
Unpacking the Library
This section explains how to unpack the library and move it to its installation location. The following are the major steps in this section: · · · · Receiving the library Unboxing the library Checking the packing list Positioning the library
Note:
0
Before following the instructions in this section, verify the installation site meets the requirements found in "Selecting an Installation Location" on page 4 of this document.
Receiving the Library0
Inspect the shipping pallet and carton for damage that may have occurred during shipment. Report any damage to the shipper.
Warning:
The library weighs approximately 500 pounds (227 kg). Use at least two people to unpack, move, and install the library.
Unpack the Library
0
To unpack the library:
1 Verify the minimum floor space requirements (see figure 4). Note:
Unpacking the crate requires a minimum of 8 feet (2. 44 meters) in front of the library, and adequate space at the sides and back for two people to maneuver.
Unpacking the Library
7
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. 1 August 2001
Figure 4 Minimum Floor Space Requirements-- Unpacking Site
Library Pallet
Ramp extension Unloading area (minimum) 40 in (1. 02 m) 10 ft (3. 05 m)
24 in (61 cm)
37 in (94 cm)
2 Cut the two steel bands that secure the library and packing
material to the pallet (see figure 5).
Caution:
The steel bands are under tension and will snap away when cut.
Figure 5 Removing the Steel Bands
Optional cable cover
Without optional cable cover
RA
MP
SID
E
Steel bands
RA MP SID E
With optional cable cover
8
Unpacking the Library
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. 1 August 2001
3 If the optional cable cover is included:
· · ·
Remove the cable cover box from the top of the library. Refer to the Quantum|ATL 7100 Series Cable Cover Installation Instructions to install the cable cover.
4 Cut the two steel bands that secure the cardboard box to the pallet. 5 Lift the box top straight up and off the cardboard box (see
figure 6).
6 Open the four retaining clips on the rear of the cardboard box. 7 Unwrap and remove the cardboard box from the library.
Figure 6 Removing the Cardboard Box
Box top
Retaining clip
Cardboard box
Pallet
8 Lift the accessories tray up and off the library (see figure 7). 9 Lift the foam cap up and off the library (see figure 7). 10 Remove the two screws that secure the stop block. The stop block
is located under the library in front of the casters.
Unpacking the Library 9
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. 1 August 2001
11 Remove the stop block.
Figure 7 Removing the Accessories Tray and Stop Block
Accessories tray
Foam cap
Stop block
12 Pull the two ramp extensions out from under the library (see
figure 8).
13 Secure the ramp extensions to the pallet using the Velcro straps. [. . . ] Close the drive access door.
3 Remove the packing material from the front door by using the
procedure in step 2.
4 Remove the packing material from the storage array door: a b c
If necessary, unlock the storage array door. Remove the foam sheet.
Installation Procedures
13
Quantum|ATL 7100 Series Library Unpacking Instructions Document 6241100-03, Ver. 1 August 2001
Figure 11 Access Doors
Load port door
Storage array door
Front door
Drive access door
5 Remove the tie wraps from the robotics area (see figure 12): a b
Remove the tie wrap that secures the gripper. Lower the foot on the low side by applying a 1/4 turn with the open-end wrench. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM ATL 7100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM ATL 7100 will begin.