Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM CLL3200. We hope that this QUANTUM CLL3200 user guide will be useful to you.
Lastmanuals help download the user guide QUANTUM CLL3200.
Detailed instructions for use are in the User's Guide.
[. . . ] Power On Unit, if required and allow for the completion of the device's POST (Power-On SelfTest). Ensure the Certance CLL3200 LTO-2 Loader is set to its default settings. For further details refer to the Installation and Operation Manual for the Certance CLL3200 LTO-2 Loader. [. . . ] (Refer to Figure 3 on next page. ) Click the Configuration tab in the dialog box and increase the Media block size (Kb) from the default setting of 32 Kb. Ensure your operating system and drive can support the new value entered. Click the Performance tab in the dialog box and increase the default transfer memory buffer setting from the default setting of 257 Kb. Ensure your operating system can support the new value entered. NOTE: The Amount of memory to assign to transfer buffers (Kb) is what is often referred to as the shared memory setting. The shared memory is allocated in 32Kb blocks, with one byte added. The optimum figure is dependent on the drive model, and will be stated in the relevant BakBone Software Benchmark document, but the minimum value to use is at least 4x the block size setting for the drive. Ensure there is sufficient RAM (Windows NT or 2000) or Kernel Memory (UNIX). If there are more drives repeat the above steps for each drive as required. Save device configuration by selecting the "Save Details" button in the top left corner. Select OK for the "Device added successfully" window. Close the "Add Library" window.
BakBone Software, Inc.
5
11/3/2003
Device Application Notes For NetVault
Revision A7
Figure 3. Drive Performance Tuning
BakBone Software, Inc.
6
11/3/2003
Device Application Notes For NetVault
Revision A7
Other information Known Firmware Issues: None. Device Notes: When importing/exporting tapes through the front door, once complete, you must exit (cancel) all the way out of the front panel menus for the loader to re-inventory and return to an ONLINE state. Otherwise, when issuing the "close door" operation in NetVault, the loader will remain OFFLINE according to NetVault. For optimal performance, Certance recommends a block size of 64Kb and a shared memory setting of 64Mb (65536 Kb). [. . . ] If a cleaning cartridge is auto-discovered, it may make this device unusable. If this condition is encountered, the remedy for this situation is to: 1. Stop the NetVault services Remove all cleaning cartridges from the library Restart the NetVault services Configure CLEANING SLOT(s) and/or cleaning cartridge barcode prefixes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM CLL3200
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM CLL3200 will begin.
