Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM DAT 160 SAS. We hope that this QUANTUM DAT 160 SAS user guide will be useful to you.
Lastmanuals help download the user guide QUANTUM DAT 160 SAS.
Manual abstract: user guide QUANTUM DAT 160 SASQUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Feed the external tape drive connector and cable through the empty slot from inside the server.
Important Information About Your New Tape Drive
Installation decisions require a clear understanding of your server's current SAS configuration. · With some servers you can connect to a spare SAS connector on the SAS controller. This is a straightforward installation, and it is recommended.
Server has Yes spare PCI slot for routing cable?
Yes
Option 2: Connect to spare internal port.
No
Cannot install SAS tape drive.
Need to disconnect disk bay?Yes
No
· With servers that do not have a spare internal connector, you will need to rewire the hard disk drive bays. [. . . ] Upgrade your backup application software.
0
·
Note:
Always upgrade your backup application software to make sure it works correctly with the tape drive. Product of .
*81-81846-01 A01*
81-81846-01 A01, September 2007
Note:
This will leave unused cabling within the server because the `B' connector is not required in this configuration. Neatly coil and secure the unused cabling so that it does not interfere with other components inside the server.
3. Connect the SAS cable and power cord to the tape drive.
0
1. Locate the existing SAS cable and determine whether a hard disk drive bay will be lost. 0 Look at the front of the server to establish how the hard disk drive bays are numbered . Important: If the hard disk drive bay is in use, STOP. Even if other hard disk drive bays are empty, the installation will not work. (Do not move a hard disk to create an empty bay because you might damage your server configuration. ) You must purchase and install a new HBA. Locate the cable that connects the hard disk drive bay to the SAS controller (HBA) and remove it completely. (The existing cable will be replaced by the split cable.
Part 4 Understanding the Front Panel LEDs
4. Switch on the tape drive and power up the server.
0
Clean amber · On: cleaning cartridge in use. · Off: the drive does not require cleaning. · Flashing: the drive needs cleaning. Tape amber · Off: no fault has been detected. · Flashing: the cartridge currently in the drive is faulty (damaged or unsupported). Feed the split cable through the server rear panel. · · Off: no fault has been detected. · Flashing: the drive mechanism has detected a hardware error.
Watch the boot screen carefully, and verify that the new SAS tape drive is listed in the boot sequence. If there are any errors or unexpected messages, go back and check the SAS cabling carefully. If you have not already installed the driver, do it now. · · For Windows, the driver is available at www. quantum. com/support. [. . . ] · · · · · Keep media in the case provided. Follow the temperature, humidity and acclimitization guidelines on the media packaging. Avoid dropping it or rough handling, as this is likely to damage the cartridge. Do not exceed normal cartridge life (100 full volume backup or restore operations).
You might need to remove components, such as fan banks, while you work with the cable. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM DAT 160 SAS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM DAT 160 SAS will begin.
