Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM DAT432. We hope that this QUANTUM DAT432 user guide will be useful to you.
Lastmanuals help download the user guide QUANTUM DAT432.
Detailed instructions for use are in the User's Guide.
[. . . ] Power ON Unit, if required, and allow for the completion of the device's POST (Power-On SelfTest). Ensure default configuration settings on the library front LCD panel. Refer to the Installation and Operation Manual. [. . . ] Add Drive 1 by selecting the drive and verify the correct device is displayed in the Selected Drives area on the right. (Figure 2. ) If there are more drives in the library, add the remaining drives, mapping them to each drive bay. Ensure the Drive Bay number is correct before selecting. Change the Library Name if desired or leave as default.
Figure 2. Drive Addition Within NetVault
BakBone Software, Inc.
5
10/24/2003
Device Application Notes For NetVault Configuration (for Optimum Performance)
Revision A7
Select the Configure Tab, right-click the drive and select Configure, to display the Configure Device dialog box. (Refer to Figure 3 on next page. ) Click the Configuration tab in the dialog box and increase the Media block size (Kb) from the default setting of 32 Kb. Ensure your operating system and drive can support the new value entered. Click the Performance tab in the dialog box and increase the default transfer memory buffer setting from the default setting of 257 Kb. Ensure your operating system can support the new value entered. NOTE: The Amount of memory to assign to transfer buffers (Kb) is what is often referred to as the shared memory setting. The shared memory is allocated in 32Kb blocks, with one byte added. The optimum figure is dependent on the drive model, and will be stated in the relevant BakBone Software Benchmark document, but the minimum value to use is at least 4x the block size setting for the drive. Ensure there is sufficient RAM (Windows NT or 2000) or Kernel Memory (UNIX). If there are more drives repeat the above steps for each drive as required. Save device configuration by selecting the "Save Details" button in the top left corner. Select OK for the "Device added successfully" window. Close the "Add Library" window.
BakBone Software, Inc.
6
10/24/2003
Device Application Notes For NetVault
Revision A7
Figure 3. Drive Performance Tuning
BakBone Software, Inc.
7
10/24/2003
Device Application Notes For NetVault
Revision A7
Other information Known Firmware Issues: None. [. . . ] Type: Standard Cleaning Method for Seagate DAT72. Cleaning cartridges must be placed in pre-defined Cleaning Slots only. NetVault will auto-discover unexpected cleaning tape cartridges however such operation will result in the cleaning cartridge being unusable. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM DAT432
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM DAT432 will begin.
