User manual QUANTUM PX500 TAPE SECURITY QSG 81-81627-01 A01

[. . . ] NOTE: Secure Passwords must be alphanumeric strings of at least one character. A blank secure password will be rejected. Secure Password and Verify Password must match. 2 Verify the secure password by entering the password a second time in the Verify Password box. [. . . ] Write Secure Key to All Cartridges - The Secure Key will be written to all cartridges, including blank and formatted cartridges containing data. This mode may be used to apply a Secure Key to cartridges with preexisting data. 3 · · PX500 Series DLTSageTM Tape Security Quick Start Guide Enable/Disable Secure Key for Drives 0 Refer to figure 5 for information on Enable/Disable Secure Key for Drives. Figure 5 Enable/Disable Secure Key for Drives 1 Select the Secure Key name from the list of available names. NOTE: Selecting None to will cause the library to NOT use a Secure Key. NOTE: The system must be offline to modify a Secure Key. Assign Secure Key to Cartridge The Secure Key can only be used with tape drives that are Secure Key capable. This section lists the tape drives in the library that are Secure Key capable. A checkmark in the Secure Key column indicates a Secure Key is enabled for the tape drive. 1 The Secure Key can be enabled or disabled for all tape drives by clicking the corresponding radio button. 2 Click the Secure Key check box for individual tape drives to enable/disable Secure Key for a tape drive. NOTE: The system must be offline to Enable/Disable Secure Key setting for drives. 0 Refer to figure 7 for information on Assign Secure Key to Cartridge. Figure 7 Assign Secure Key to Cartridge Modify Secure Key for Library 0 Click Find to list all secured cartridges and their assigned Secure Key names. To assign a Secure Key to a cartridge: 1 Enter the barcode of the cartridge. Separate multiple barcodes with either spaces or commas. 2 Select a Secure Key name from the list of available names. 3 Selecting Remove will remove the association between the cartridge and a Secure Key name in the cartridge database. 4 Click Update to accept the changes. Refer to figure 6 for information on Modify Secure Key for Library. Figure 6 Modify Secure Key for Library Create Secure Key Name/ Secure Key Pair To modify the Secure Key used by the library: 0 Refer to figure 8 for information on Create Secure Key Name/Secure Key Pair. 4 PX500 Series DLTSageTM Tape Security Quick Start Guide Figure 8 Create Secure Key Name/Secure Key Pair · · Unused Secure Keys - keys not associated with any cartridges or tape drives currently in the system. Inactive Secure Keys - keys associated with cartridges in the library, or currently assigned to the library, but not assigned to any tape drives. Active Secure Keys - keys currently assigned to a tape drive. · To delete a Secure Key Name/Secure Key pair from the library: 1 Select the desired Secure Key Names from the available lists. A confirmation message will be displayed, click Yes to continue. Any tape drives that have been Secure Key enabled will remain enabled, but the Secure Key will not be used to read or write cartridges. To create a secure key name/secure key pair: 1 Enter the Secure Key Name. [. . . ] The Secure Key page is refreshed listing restored secure keys. NOTE: An error is displayed if the serial number provided does not match the serial number used to encode the secure keys. 2 Insert the tape cartridges into the PX500 Series library (refer to the PX500 Series User's Guide (PN 81-81290) for information on inserting tape cartridges. 3 On the PX500 Series library where the tape cartridges were originally secured with a key, backup the specific Secure Key associated with those tape cartridges (see Backup Secure Key File). 4 Upload the Secure Key from the original library to the where the tape cartridges were imported (see Upload Secure Key File). [. . . ]