User manual QUANTUM QFLASH T4DX4D

[. . . ] Models T4d, X4d Operating Instructions Qflash 4d Digital Flash ® For use with Quantum Turbo®, Turbo 2x2, Turbo Compact, or Turbo Z Batteries Quantum Instruments Designed and manufactured in the USA Reflector Lock Ring M Open Flash (Test) Option Button Mode Button I Set Button G Modeling Light L Down Button Flash Indicator Up Button J 1 TABLE OF CONTENTS Section 1. 0 2. 0 3. 0 4. 0 5. 0 6. 0 7. 0 8. 0 9. 0 10. 0 11. 0 Description INTRODUCTION WARNINGS SETTING UP Qflash NEW FEATURES FOR PREVIOUS Qflash OWNERS QUICK START Qflash OPERATION WITH QUANTUM DEDICATED QTTL ADAPTERS MULTIPLE Qflash OPERATION - WIRED MODE MULTIPLE Qflash OPERATION - WIRELESS MODE EXPOSURE COMPENSATION OF Qflash TYPICAL LIGHTING SITUATIONS CUSTOMER SERVICE 1. INTRODUCTION Qflash models T4d and X4d provide professional quality lighting for both digital and film cameras. Quantum's proprietary QTTL® Adapters* dedicate Qflash seamlessly to your camera. Also, many features of the Qflash "Digitals" enhance lighting control for cameras without dedicated control. [. . . ] Those settings determine the choices you have for the Remotes. Press Set G until "C" is blinking. (If "R1" or "R2" is blinking instead, press the Up/Down J L buttons until "C" blinks). The mode of the Control flash will blink. Use the Up/Down buttons to select the mode. The choices are Man, Auto, TTL, Auto Fill, QTTL (if a D series adapter connects to the camera), and OFF. When the Control Qflash is set to OFF it will not fire, however, Remotes 1 and 2 will still fire (if they are not also set to OFF). 19 Press Set G again to set the parameters for the mode selected. For example, power (1/64 to 1/1) for Man, F# for Auto, etc. There are no settings for TTL or OFF modes. If a QTTL adapter is connected to any of the Qflash 4d's, then QTTL mode will be available for all of the Qflashes. The Control Qflash will display the fill/flash ratio set on the QTTL adapter. To change the ratio, turn the R Fill dial on the QTTL adapter. The fill ratio will be effective for all Qflashes connected. Note: Some cameras have their own flash compensation ( +/-). Use either the camera's flash compensation, or Qflash's, but not both. Press Set G again and the film speed (ISO) blinks. Make the adjustment with the Up/Down J L buttons. Note that in QTTL mode the film speed is controlled by the camera and cannot be changed here. 7. 1. 3 Changing the Remote flash settings from the Control flash Press Set G until "C", "R1" or "R2" blinks in the display. Use the Up/Down J L buttons until "R1" or "R2" blinks. Press Set G again and the mode of R1 or R2 will blink. Use the Up/Down J L buttons to change the mode of the Remote. [. . . ] If you are using two Qflash 4d's, then see section 7. 1 for more detail. Equipment needed: · One Qflash 4d located at camera position · One Qflash / 2/ 2d located off to the side of the subject · One QF50 control cable · Two Quantum Turbo, 2x2, Z, or Compact Batteries Set up : Same set up as previous page. 37 11. CUSTOMER SERVICE Having any trouble in using your Quantum product?Mail, call, fax, or email our Service Department: Service Department Quantum Instruments Inc. [. . . ]