User manual QUANTUM STORNEXT 4.1 CLI REFERENCE GUIDE REV A

[. . . ] Quantum StorNext 4. 1 CLI Reference Guide Introduction Viewing man Pages File System Commands 5 5 6 cvadmin . 20 Storage Manager Commands 20 fsaddclass . 32 6-01688-14 Rev A, December 2010 *6-01688-14* Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 fsdrvclean . 62 Contacting Quantum 63 2 Contents Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 Made in the USA. [. . . ] Separate multiple policy classes with a space. The value of this parameter should be less than or equal to the current time. Format is: YYYY:MM:DD:hh:mm:ss The default is the current time (all inactive versions removed for all times). [ -t <endtime> ]> -r [ <mediaID> ] Cleans all Tertiary Manager knowledge of files on media where rminfo processing has been done. If a mediaID is specified, then processing is restricted to only that media. Displays a list of all media where rminfo processing has been done. [ -l ] Storage Manager Commands 31 Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 Options / Arguments -p <filename> Description Valid only with -r option. The file filename contains a list of files that need to be retrieved so missing copies can be regenerated. fsdirclass The fsdirclass command is used to display the policy class associated with the specified directory. Command Syntax fsdirclass <directory> Options / Arguments Table 20 lists options and arguments for the fsdirclass command. Table 20 Options and Arguments: fsdirclass Options / Arguments <directory> Description The directory path for which the associated policy class is returned. If preceded by a slash (/) provide the full path. Otherwise the path is resolved from the current directory. (The path must be less than 256 characters. ) fsdrvclean The fsdrvclean command is used to clean the specified drive. Command Syntax fsdrvclean <drivealias> Options / Arguments Table 21 lists options and arguments for the fsdrvclean command. Table 21 Options and Arguments: fsdrvclean Options / Arguments <drivealias> Description The alias of the drive to clean. A drive alias is a variable string of up to 255 characters. If the drive alias contains spaces, use single quotes around the string. (Use the fsstate command to list the set of drive aliases. ) 32 Storage Manager Commands Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 fsfilecopy The fsfilecopy command is used to replace the primary copy (or a specified copy) of a file on a piece of media by duplicating it on another piece of media. Command Syntax fsfilecopy -r <filename> -d <destinationmediaID> [ -c <copynum> ] fsfilecopy -r <filename> [ -b ] [ -t <mediatype> ] [ -c <copynum> ] Options / Arguments Table 22 lists options and arguments for the fsfilecopy command. Table 22 Options and Arguments: fsfilecopy Options / Arguments -r Description Copies the file(s) filename to a piece of media and deletes all corresponding file(s) on the original piece of media. If preceded by a slash (/) provide the full path. Otherwise the path is resolved from the current directory. Separate multiple file names with a space. Specifies the piece of media to which the file(s) are copied. Specifies the copy of the file(s) to replace. (If not specified, the primary copy is replaced. ) File(s) are copied to a blank piece of media. Defines the type of media to be used for replacement. Valid values: · AIT · AITW · LTO · LTOW · SDISK · 3590 · 3592 · 9840 · 9940 · T10K · DLT4 <filename> -d <destinationmediaID> [ -c <copynum> ] [ -b ] [ -t <mediatype> ] Storage Manager Commands 33 Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 fsfileinfo The fsfileinfo command is used to report the current location of files, whether on disk, media, or not in the system. Command Syntax fsfileinfo [ -c ] <filename> Options / Arguments Table 23 lists options and arguments for the fsfileinfo command. Table 23 Options and Arguments: fsfileinfo Options / Arguments <filename> Description Path and filename of the file(s) to report on. If preceded by a slash (/) provide the full path. Otherwise the path is resolved from the current directory. [. . . ] Default value: 15 Valid values: 1 to 32 [ -R <retries> ] Number of retries that the software attempts if a timeout is received. Default value: 3 Time interval (in seconds) that the software waits for status before returning a timeout. Default value: 120 RPC program number for the software. Default value: 300016 [ -T <timeout> ] [ -V <number> ] vspoolqry The vspoolqry command is used to display information for a specified drive pool or for all drive pools. Command Syntax vspoolqry -a | <drivepool> [-v] [ -I ] [ -h ] [ -H <hostname> ] [ -P <priority> ] [ -R <retries> ] [ -T <timeout> ] [ -V <number> ] Options / Arguments Table 50 lists options and arguments for the vspoolqry command. Table 50 Options and Arguments: vspoolqry Options / Arguments -a Description Displays information for all drive pools. 61 Storage Manager Commands Quantum StorNext 4. 1 CLI Reference Guide 6-01688-14 Rev A December 2010 Options / Arguments <drivepool> [ -v ] [ -I ] [ -h ] [ -H <hostname> ] [ -P <priority> ] Description Displays information for the specified drivepool. [. . . ]