User manual QUANTUM TC2201 81-81539-01 A01

[. . . ] Quantum TC2201 User's Guide, 81-81539-01 A01, December 2005, Made in USA. Quantum Corporation provides this publication "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. COPYRIGHT STATEMENTS Copyright 2005 by Quantum Corporation. [. . . ] For the serial port, if you do not see messages over the Command Line Interface, you may need to re-check your computer's serial port settings. Note: The main menu appears as follows: Quantum TC2201 User's Guide 72 Power Up Messages Table 8 Main menu Quantum TC2201 Router X. XX. XXXX XXXXXX XXXXXXXXXXXXXX 18:37:08 07/26/2005 1) Perform Configuration 2) System Utilities 3) Display Trace and Assertion History 4) Reboot 5) Advanced Software Licensed Features 6) Download a New Revision of The Firmware Command > The main menu allows for various operations to be performed on the TC2201. · · · · Select 1 to access TC2201 configuration settings. This option is described later in this chapter. Select 2 to access system utilities information and settings. This option is described later in this chapter. Select 3 to display trace and assertion history. This option is described later in this chapter. A confirmation message will appear verifying you want to do this. If you enter N for No, you are returned to the System Utilities menu. If you enter Y for Yes, the TC2201 will restart. This option is further described later in this chapter. Select 5 to access the Advanced Software Licensed Features menu. This option is described later in this chapter. Select 6 to download a new revision of the firmware. A confirmation message will appear verifying you want to do this. If you enter N for No, you are returned to the Main menu. If you enter Y for Yes, the TC2201 begins accepting firmware data from the serial port. This option is further described later in this chapter. · · Quantum TC2201 User's Guide 73 Perform Configuration Perform Configuration The Perform Configuration menu allows the administrator to configure the various options on the TC2201. For most configuration changes to take effect, you must reboot the TC2201. You can enter uppercase and lowercase characters interchangeably whenever menus indicate letters as choices. 3 Table 9 Configuration menu Configuration Menu X. XX. XXXX XXXXXX XXXXXXXXXXXXXX 08:56:22 07/26/2005 1) User Settings 2) Baud Rate 3) Ethernet 4) iSCSI 5) Parallel SCSI 6) Parallel SCSI Buffered Tape Write 7) Device Mapping 8) Trace and Event Log Settings 9) Real-Time Clock A) Save Configuration B) Restore Last Saved Configuration C) Reset and Save Configuration to Factory Defaults X) Return to main menu Quantum TC2201 User's Guide 74 Perform Configuration User Settings Configuration 3 This menu changes security settings, including the user name and password. User names and passwords should be unique and kept confidential and it is recommended to use a combination of letters and numbers when creating user names and passwords. The default values are "root" for user name and "password" for password. Table 10 User Settings Configuration Menu User Settings X. XX. XXXX XXXXXX XXXXXXXXXXXXXX 08:56:22 07/26/2005 Current Username : root 1) Change Username 2) Change Password X) Return to previous menu Note: In the event that either or both the user name and password are forgotten, it is possible to reset the user name and password to their default values by resetting the TC2201 to factory defaults. [. . . ] SCSI adapter A 16-bit fast/wide SE or Differential or LVD or 8-bit narrow single-ended physical connection between the TC2201 and the SCSI devices. Each SCSI adapter supports up to sixteen (for fast/wide) or eight (for narrow) SCSI devices, including itself. SCSI addressing A SCSI adapter supports up to 16 devices, including itself. Each device has its own unique SCSI address. [. . . ]