User manual QUATECH ACH0-CA-DP000 DATASHEET

[. . . ] WIRELESS PRODUCTS AirborneTM Accessories ACH2-AT-DP000 Antennas ACH0-CA-DP000 Adapter Cables AirborneTM Accessories are designed for connection to 802. 11 wireless devices operating in the 2. 4GHz ISM band. [. . . ] A wide range of antenna types and gain options enable an OEM to select the antenna that best matches their application requirements. The lower gain and smaller antennas, such as the "rubber duck" antennas, fit applications where the range is not required to exceed 200400m while the higher gain directional antennas would be suitable for extended range that require greater than 800m reach. Recommended for AirborneTM 802. 11 embedded and external system bridge products All accessories support Airborne products in OEM applications in all industries Antennas designed for external mounting, mobile or fixed station, and indoor and/or outdoor operation Select from a variety of radiation patterns and gain options to suit your application RP-SMA, N-Type and U. FL connectors supported Adapter cables also available Specialty Antenna To meet the demands for targeted solutions in the transportation industry, consider the ACH2AT-DP011, a low profile, mobile, high gain omnidirectional whip antenna with an integrated magnetic mount. Customized antenna options are also available. 30B270-00 Rev. B 11/05 This document contains information on a product that is currently released to production at DPAC Technologies Corp. DPAC and Quatech reserve the right to change products or specifications herein without prior notice. Page 1 of 2 AirborneTM - Antenna Product Family WIRELESS PRODUCTS Product Line Model No. Description Indoor/Outdoor Internal/External Gain Connector Style Radiation Pattern ACH2-AT-DP002 ACH2-AT-DP003 ACH2-AT-DP004 ACH2-AT-DP005 ACH2-AT-DP006 ACH2-AT-DP007 ACH2-AT-DP008 ACH2-AT-DP009 ACH2-AT-DP010 ACH2-AT-DP011 Model No. 2Dbl Portable(Rubber duck) Antenna (RP-SMA) 5Dbl Portable (Rubber duck) Antenna (RP-SMA) 5Dbl Portable(Rubber duck) Antenna, Flying Lead (U. FL) 15 dBi Corner Reflector Antenna (RP-SMA), Indoor/Outdoor 7 dBi Patch (RP-SMA) Antenna, Indoor/Outdoor 8. 5 dBi Fiberglass Omnidirectional Antenna (N-Type) Indoor/Outdoor 10 dBi Patch Antenna (RP-SMA) Indoor/Outdoor 20 dBi Panel (N-Type) Antenna, Indoor/Outdoor 11 dBi Fiberglass Omnidirectional Antenna (N-Type) Indoor/Outdoor 5 dBi Magnetic mount vehicle Antenna, Indoor/Outdoor Other Accessories I I I I/O I I/O I/O I/O I/O I/O E E E E E E E E E E 2 dBi 5 dBi 5 dBi 15 dBi 7 dBi 8. 5 dBi 10 dBi 20 dBi 11 dBi 5 dBi RP-SMA RP-SMA U. FL RP-SMA RP-SMA N-type RP-SMA N-Type N-Type RP-SMA Whip Whip Whip Corner Reflector Patch Fiberglass Patch Patch Fiberglass Whip Magnetic mount Omni Omni Omni Directional Directional Omni Directional Directional Omni Omni Indoor/Outdoor Internal/External Connector Cable Length ACH0-CA-DP001 ACH0-CA-DP004 Adapter Cable, U. FL (plug) to U. FL (plug), 200mm, Internal Adapter Cable, RP-SMA (Jack) to U. FL (plug), 100mm, Indoor/Outdoor I/O I - U. FL to U. FL RP-SMA 200mm 100mm Adapter Cable U. FL (Plug) to U. FL (Plug) ACHO-CA-DP001 This adapter makes the connection from the AirborneTM embedded module to a board-mounted U. FL connector. This allows a direct coaxial connection between the AirborneTM module and the main-board. Connection to the antenna can then be made through routing and appropriate board mounted connector. Adapter Cable RP-SMA (Jack) to U. FL (Plug) ACHO-CA-DP004 This adapter is designed to provide an enclosure-mountable direct cable connection to the AirborneTM embedded modules. The DP004 eliminates the need for board-level design or RF layout by enabling a direct Coaxial connection between the Airborne module and an RPSMA Jack. [. . . ] DPAC Technologies®, AirborneTM are trademarks of DPAC Technologies Corp. Page 2 of 2 [. . . ]