User manual QUATECH SDS RS-422 DATASHEET

[. . . ] Serial Device Servers High Performance Serial-to-Ethernet with PowerPC®, Low Latency and Easy Installation 100 Series: RS-232 to Ethernet (LAN) 400 Series: RS-232/422/485 (MEI) to Ethernet (LAN) Available in 1, 2, 4 and 8-port configurations, options include +5V at pin 9 to power external devices and industrial surge suppression. [. . . ] Quatech Device Servers may be managed through the Windows® Device Manager interface or a Web browser, so you can count on trouble-free configuration and maintenance long after the initial installation is completed. - CNC/DNC Applications Energy Management Security & Access Control Government & Defense Material Handling & Logistics Intelligent Traffic Systems Yet while serial protocols have proven to be reliable and robust, there are drawbacks - cable lengths are limited and expensive, COM ports are often in short supply on the host PC and the attached serial devices are not remotely accessible for monitoring or support. A Quatech Device Server overcomes these limitations. Its hardware and drivers are invisible to connected serial devices and their software applications, routing data through an IP network to "virtual" COM ports installed on the host by the Installation Wizard. The 400 Series Device Server models introduce the software-selectable RS232/422/485 Multi-Electrical Interface (MEI). Unlike many competing device servers in the marketplace, Quatech offers MEI capabilities on all ports at the click of a mouse. LEDs tell you which ports are using which protocol, so go ahead, mix and match. Embedded Device Servers for custom enclosures Embed a high performance ethernet to serial converter in your product. Ideal for OEM solutions, custom enclosures and other situations where the external shell is not needed, Quatech Embedded Device Servers offer all the industry leading features as our external line. Rev 1. 0, 10/06 5675 Hudson Industrial Parkway * Hudson, OH 44236 1. 800. 553. 1170 * +1 330. 655. 9000 * www. quatech. com DEVICE SERVER SPECIFICATIONS Ordering Information Model SSE-100D SSE-100D-EMB SSE-100D-5V SSE-400D DSE-100D DSE-100D-5V DSE-100D-EMB DSE-400D QSE-100D QSE-100M QSE-400D QSE-400M ESE-100D ESE-100M ESE-400D ESE-400M Ports 1 1 1 1 2 2 2 2 4 4 4 4 8 8 8 8 Connector DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male RJ-45 Female DB-9 Male RJ-45 Female DB-9 Male RJ-45 Female DB-9 Male RJ-45 Female DCD RxD TxD DTR GND DSR RTS CTS RI Signal Information RS-232 DB-9 Pin # 1 2 3 4 5 6 7 8 9 RS-422/485 4 wire mode AuxlnRxD+ TxD+ AuxOutGND RxDAuxOut+ Auxln+ TxDPower Supply +5V, 2A (10 W) max DC, with auto-sensing AC adapter provided for 100VAC­240VAC, 50Hz­60Hz operation Typical power consumption: +5V, 0. 8A(4W) Environment Operating: 0° C to 70° C Storage: ­40° C to 70° C Relative Humidity: 10% to 90% non-condensing Dimensions SSE/DSE Height: 1. 18" (2. 99 cm) Width: 3. 33" (8. 46 cm) Depth: 4. 69" (11. 91 cm) SSE-100D-EMB Height: . 61" (1. 54 cm) Width: 3. 50" (8. 89 cm) Depth: 4. 50" (11. 43 cm) QSE Height: 1. 50" (3. 40 cm) Width: 9. 96" (25. 30 cm) Depth: 4. 69" (11. 91 cm) ESE Height: 1. 96" (4. 97 cm) Width: 9. 96" (25. 30 cm) Depth: 5. 40" (13. 72 cm) Certifications FCC, CE Serial Protocols xxx-100 series: RS-232 xxx-400 series: software selectable RS-232/422/485 DB-9 Male, External View Hardware Processor: FreescaleTM PowerPC® SDRAM: 8 MB FLASH Memory: 2 MB Firmware stored in FLASH may be upgraded via LAN interface LAN Interface 10/100 Base T (IEEE 802. 3) auto-negotiation, auto MDI/MDIX and RJ-45 Ethernet connector Receiver inputs (RS-232) Input Voltage Rating: -15V to +15V Receiver Skew: 120 ns (typ), 250 ns (max) Receiver inputs (RS-422/485) Input Voltage Rating: -15V to +15V Common Mode Input Voltage Receiver Skew: 13 ns (typ) Transmitter Outputs (RS-232) High Level Output: +5V (min), +5. 4V (typ) Low Level Output: -5V (min), -5. 4V (typ) Transmitter Skew: 50 ns (typ), 200 ns (max) Protocols and software Management: UDP, TCP/IP, HTTP, DHCP, ARP, ICMP, SNMP (MIB II) Initial IP address configuration: DHCP, static IP set within the Installation Wizard) or a custom UDP datagram utility (with command line interface) for unattended installations Quatech provides several ways to manage, monitor and configure wireless device servers Transmitter Outputs (RS-422/485) after installation: Transmitter Outputs: 2V (min) for 100 ohms load - Windows® Device Manager (Quatech Device Transmitter Skew: 5 ns (typ), 10 ns (max) Manager in Windows NT) Distance: 4000 feet - On-board HTML pages accessible from a standard web browser Parity, Stop Bits: - Simple Network Management Protocol(SNMP) Parity configurable as: None, Even, Odd - IntellisockTM TCP socket services Data bits configurable as: 5, 6, 7, 8 Stop bits configurable as: 1, 1. 5, 2 Communication modes: Normal, Tunneling, Raw TCP, Auto TCP, Raw UDP or Intellisock Speed: TCP advanced socket services Each serial port supports data transfer speeds of up to 921. 6 Kbps, depending on flow control OS support protocols used, cable length and condition, Device drivers provided for Windows NT, and other factors Windows 2000, Windows XP, and Linux Raw TCP, Raw UDP, Tunneling, AutoTCP and Surge Suppression (SS) Option: IntellisockTM modes are O/S independent Surge suppression is capable of sustaining up Please check Quatech's website for the latest to 40-A peak, 8x20 Joules transient surges, a O/S driver support information clamping voltage of 30V (RS-232) or 15. 5V (RS-422/485), and a peak energy dissipation of 0. 1 Joules Accessories Surge Suppression DB-9 to RJ-45 Adapters DB-9 to Screw Terminal Adapters International Power Cords DIN Rail Mounting Kit Freescale and the Freescale Enabled logo are trademarks of Freescale Semiconductor Inc. PowerPC is a registered trademark of IBM Corporation and is used under license. [. . . ] Intellisock is a trademark of Quatech, Inc. 5675 Hudson Industrial Parkway Rev 1. 0 10. 06 Hudson, OH 44236 www. quatech. com 1. 800. 553. 1170 +1 330. 655. 9000 [. . . ]