User manual QUATECH SYNCHRONOUS DATASHEET

[. . . ] Synchronous Serial Solutions For rigorous security and intensive data integrity protocols Synchronous serial connectivity is an appropriate choice when rigorous security and intensive data integrity protocols are required for high-speed serial communication. [. . . ] The cards' SCC also provides a programmable baud rate generator and digital phase-lock loop (DPLL) for recovering data clocking from received data streams. SyncDrive Plus (for Windows 2000/XP) and SyncDrive (for Windows 95/98/Me, DOS and OS/2), are frame-level synchronous communication drivers included with all synchronous products. While not application programs themselves, the SyncDrive (Plus) package provides C callable routines and C data structures designed to aid in the development of application software. s Single port cards for PCMCIA or PCI RS-232 or RS-422/485 interface Supports BiSync, HDLC and SDLC protocols 4 Mbps max data rate (RS-422/485) 600 kpbs max data rate (RS-232) 1024 byte transmit and receive FIFOs Programmable baud rate generator SyncDrive Plus and SyncDrive frame-level driver package included Five year warranty s s s s s s s www. quatech. com RS-232 Specifications Bus Interface: MPAP(R): 16-bit PCMCIA MPAC: PCI 2. 2 compliant OS Support: Windows 95/98/Me/NT/2000/XP, OS/2 DOS (MPAC only) via SyncDrive software Data Rate: 600 kbps (max)* * Actual baud rates can be affected by cabling and other factors RS-422/485 Specifications Bus Interface: 16-bit PCMCIA OS Support: Windows 95/98/Me/NT/2000/XP, OS/2 via SyncDrive software Data Rate: 2. 45 Mbps or 4. 0 Mbps with an upgraded crystal. * Actual baud rates can be affected by cabling and other factors Serial Ports: 1 synchronous port configurable for RS-422 or RS-485 Serial Ports: 1 synchronous RS-232 port DTE configured Serial Port Connectors: Removable Cable with DB-25 male Serial Port Connectors: MPAP: Removable Cable with DB-25 male MPAPR: Ruggedized Attached Cable with DB-25 male MPAC: On-board DB-25 male Controller: MPAP(R): 85230 compatible 16-MHz SCC MPAC: Z85230 20-MHz (ESCC) FIFOs: 1024-byte Transmit and Receive FIFOs Environment: Operating: 0°C to 70°C Storage: -50°C to 80°C Humidity: 10% to 90% Power Requirements: +5V, 30mA (typ) Certifications: CE, FCC Class B Ordering Information: MPAP-100: One port RS-232 PC Card with removable cable MPAPR-100: One port RS-232 PC Card with attached cable MPAC-100: One port RS-232 PCI board Ordering Information: MPAP-200/300: One port RS-422/485 PC Card with removable cable Controller: 85230-compatible 16-MHz SCC (contact Quatech sales for upgraded crystals) FIFOs: 1024-byte Transmit and Receive FIFOs Environment: Operating: 0°C to 70°C Storage: -50°C to 80°C Humidity: 10% to 90% Power Requirements: +5V, 30mA (typ) Certifications: CE, FCC Class B SyncDrive Plus and SyncDrive Included with All Products SyncDrive Plus: Frame-level HDLC/SDLC driver for Windows 2000/XP SyncDrive: Frame level bit-synchronous (HDLC/SDLC) and byte-synchronous (Monosync/Bisync) driver for Windows 9x/Me, DOS and OS/2 SyncDrive (Plus) is a frame-level synchronous communication driver implemented by a DLL and a device driver. Applications interface to SyncDrive (Plus) through C callable routines and C data structures. The routines provide services for channel configuration, transmitting a buffer, receiving a buffer, setting and monitoring I/O status. Once a handle is opened to the device driver, the application simply reads and writes frames as it would files, without worrying about buffer management, interrupts, or register handling. [. . . ] The C data structures used are for configuration, transmitting and receiving buffers. Made in USA www. quatech. com sales@quatech. com March, 2003 RS-232 Pinout RS-422/485 Pinout Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 11 Pin 15 Pin 17 Pin 18 Pin 20 Pin 21 Pin 24 Pin 25 Chassis Ground Transmit Data Receive Data Request to Send Clear to Send Data Set Ready Signal Ground Carrier Detect Receive Clock Out Transmit Clock In Receive Clock In Local Loopback Data Terminal Ready Remote Loopback Transmit Clock Out Test Mode Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 Pin 21 Pin 22 Pin 24 Pin 25 Chassis Ground Transmit Data+ Receive Data+ Request to Send+ Clear to Send+ Data Set Ready+ Signal Ground Carrier Detect+ Receive Clock InCarrier DetectTransmit Clock OutTransmit Clock InClear to SendTransmit DataTransmit Clock In+ Receive DataReceive Clock In+ Chassis Ground Request to SendData Terminal Ready+ Sync In (RS-422 only) Data Set ReadyTransmit Clock Out+ Chassis Ground sales@quatech. com March, 2003 Made in USA www. quatech. com [. . . ]