User manual QUATECH WLNB-SE-DP100 DATASHEET

[. . . ] AirborneTM Embedded Wireless Device Server Serial to 802. 11b Wireless LAN (Module) WLNB-AN-DP100 series WLNB-AN-DP500 Enterprise series WLNB-SE-DP100 series programming of the module - only simple configuration is required using DPAC's HTML interface. [. . . ] The Evaluation & Design Kit provides software and utilities that allow a developer to quickly and easily operate and evaluate the Wireless Device Server module. KEY FEATURES Extended operating temperature range (-40°C to +85°C) and environmental specifications, including shock and vibration tolerance Advanced security: WEP (64 & 128 bit), WPA and 802. 1x (LEAP) authentication Low power modes Built-in web server enables drop-in LAN and Internet connectivity Highly integrated 802. 11b wireless module with radio, base-band & application processor Quick time to market & reduced development costs Configurable serial, digital & analog I/O ports Integrated RTOS, TCP/IP Stack and CLI FCC Part 15 Class B Sub C Modular Approval Reduces need for RF and communications expertise RoHS compliant 5 year warranty Interoperable with advanced security Airborne is a line of highly integrated 802. 11 modules. The wireless module includes a radio, a base-band processor, an application processor and software for a "drop-in" web-enabled WiFi solution. Since there's no need to develop the software, or to develop the RF and communications expertise in-house, OEM's can realize reduced product development costs and a quick time-tomarket. AirborneTM modules provide instant LAN and Internet connectivity, and connect through standard serial interfaces to a wide variety of applications. TM Applications The extremely small footprint design makes AirborneTM easy to embed into new or existing designs. The module is interoperable with industry standard 802. 11 access points and advanced security standards such as WEP, WPA and EAP, that provide a low cost infrastructure for connection to a LAN and to the Internet. The built-in TCP/IP stack and application software provide embedded devices with instant LAN and Internet connectivity without special Model Selection Guide Interface Model No. UART RS-232 RS-422/485 SPI Digital & Analog I/O Security WEP 802. 11b (64 & 128 bit) WPA WiFi LEAP* WLNB-AN-DP101 WLNB-AN-DP102 WLNB-AN-DP501 WLNB-AN-DP502 WLNB-SE-DP101 WLNB-SE-DP501 For RoHS-compliant 802. 11b products, add "-G" at end of model number. [. . . ] 32 mW -82dBm for 11Mbps -86dBm for 5. 5Mbps -88dBm for 2 Mbps -90dBm for 1Mbps WEP (64 & 128 bit), WPA (PSK & TKIP), WPA with LEAP Supports diversity antennas, using U. FL coaxial connectors 50 ohms (on WLNB-AN-DPxxx models) 3. 3 VDC 420mA - transit mode (typical) 350mA - receive mode (typical) 75mA - sleep mode (typical) 15mA - 5% duty cycle* Data Rate MAC Protocols Data Transfer 0. 466 RF Power Sensitivity Security Antenna Supply Current Operating Temperature -40°C - +85°C GPIO Serial Up to 8 digital I/O ports and Status UART up to 921. 6 Kbps I2C Master to 400KHz SPI up to 1Mb/s (Master clock up to 20MHz) Supports RS-232/422/485 (on WLNB-SE-DP101) Up to 8 channels, 10 bit resolution 36 Pin (P/N: HRS DF 12-36DS-0. 5V) FCC Part 15 Class B Sub C Intentional Radiator Modular Approval Industry of Canada RoHS and WEEE Compliant * Low power mode requires external circuitry. Analog Connector Agency Approvals 5675 Hudson Industrial Parkway Hudson, OH 44236 © 2007 Quatech, Inc. 1. 800. 553. 1170 www. quatech. com [. . . ]