User manual QUORION QTOUCH 15 PC

[. . . ] 7 3 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 1 FIRST STEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 2 OS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. 3 DRIVER INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The power cable and DC cable must have adequate slack at all times during use. Do not connect to electrical outlets close to devices that generate voltage fluctuations or electrical noise. In particular, stay clear of devices that use large electric motors. Never insert or disconnect the power plug with wet hands. Always connect the DC cable before plugging the power cable into the wall outlet. When disconnecting the DC cable, hold it firmly at the connector area. Never attempt to repair this product yourself. Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock. Be sure to set this unit on a firm, stable, horizontal surface. Product may break or cause injury if it falls. Keep the system away from all conditions, which may cause damage, fire or accidents: Direct sunlight, high temperature and humidity, extreme changes in temperature, heating and cooling equipment, or humidity, volatile materials, high levels of dust, vibration, and impact. If water or other liquid spills into the equipment, unplug the power cable immediately, and then contact your dealer for advice. Continued usage may lead to fire or shock. To prevent possible harm to the environment or human health please separate this product from other waste streams to ensure that it can be recycled in an environmentally sound manner. For more details on available collection facilities please contact your local dealer where you purchased this product. · · · · · · · · · · · · 4 2. General Information 2. 1 Technical Data 1, 6 GHz intel ATOM CPU 1024 MB DDR2 SDRAM 533 MHz (upgradable to 2 GB) Intel® 945GSE Integrated GMA 950 Graphics, shared memory 160 GB 2. 5" SATA hard disk (upgradable) Case cooling with 2 temperature controlled fans ("super silent") Standard human interface: 15" TFT display (1024x768) with touch screen Interfaces: 3 external serial ports (COM1, COM2, COM3, powered with 5 V) 4 external USB 2. 0 ports PS2 mouse connector PS2 keyboard connector 2 x 10/100/1000 Ethernet LAN secondary display connector VGA audio connector (ear phone) Power supply 12V 8. 3A AC/DC external power supply Optional devices internal graphical VFD customer display 140x16 dots (2 lines à 20 characters with 5x7 font, currently: Noritake GU140X16J; internal connected to COM2, 38400 8N1, hardware flow control; available now) internal clerk keylock (available on request) internal cash drawer connections (available in the future) additional internal USB connectors (available in the future) 2 additional 5V-powered serial port (available in the future) You can connect ready-to-use external devices to the existing interfaces. 5 2. 2 Overview QTouch15 PC 6 2. 3 Interfaces You will find the interface connectors on the back side of the QTouch15 PC. The socket for the external power supply is on the left side near the keyboard connector. 3 Getting Started 3. 1 First Steps Connect mouse and keyboard. Connect external DVD (or CD) drive via USB connector (Note: Installation can be made by any other bootable USB device, e. g. USB memory stick, as well; Select the correct boot priority / boot device order in the BIOS). Power on DVD drive (or other boot device). 7 3. 2 OS Installation Insert the boot medium (DVD or CD) into the boot drive to install the OS. Connect the external power supply to the QTouch 15 PC. [. . . ] In case of a , , dark screen" we recommend to connect an external monitor via the VGA interface, as well as mouse and keyboard to QTouch 15 PC interfaces. green LED on the external power supply is on if not, check power cord and connections to main power red power LED on QTouch 15 PC (QUORiON label) is on if not, check the connections to the external power supply BIOS settings are correct (no wrong user settings or BIOS crash) see main board user manual and QTouch 15 PC BIOS settings (Appendix A; These settings are very important for TFT display function) In case of , , BIOS crash" check the battery on the main board: It has to be changed, if the voltage is less than 2. 4V. after a battery change we recommend to load , , default settings" for BIOS and renew the specific BIOS settings for the QTouch 15 PC (see Appendix A) 4. Information on the Electromagnetic Compatibility and Safety CE Conformance This QUORiON cash register conforms to the European Community's EMV 2004/108 directive. [. . . ]