User manual RADIOSHACK 6-IN-1 LIGHT AND LEARN REMOTE

[. . . ] 6-In-One Light and Learn Remote Owner's Manual Please read before using this equipment. X Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 A Quick Look at the Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you want to add two more channels to the macro keys, repeat Steps 1­6 twice, each time substituting another channel number in step 5. Note: You can only program three channels for each macro key. Programming more than three channels will overwrite one or more of your original channel settings. PROGRAMMING THE POWER KEY Your remote can store a power on/off sequence to control the power of up to six devices with a single key press. Once the desired sequence is stored, POWER acts as a master power key when held down for at least 2 seconds. 12 Preparation Follow these steps to program the power key. Hold down P until the red light blinks twice. Press the device keys TV, VCR, CBL/SAT, DVD, CD or AUX) in the desired order. Hold down P until the red light blinks twice. Resetting the Power Key Follow these steps to reset the Power key to the default settings (delete the master power setup): 1. Hold down P until red light blinks twice. Hold down P until red light blinks twice. REASSIGNING DEVICES Although your remote is designed to control a TV, a VCR, a cable converter (or SAT receiver), a DVD player, a CD player, and an auxiliary device, you can reassign an unused device key (for example, AUX) to control another device, such as a second VCR. Hold down P until the red light blinks twice. Press the device key for the device you are adding (for example, VCR) then press the device key for the unused key where the additional device will be assigned (for example, AUX). Set up the reassigned key to control your device (see "Setting Up Your Remote" on Page 9). Preparation 13 Note: Other reassignments are possible, including adding a second TV or second DVD player to an unused device key. Simply repeat Step 3 with your desired choices. Resetting Reassigned Device Keys If you have reassigned a key (for example, you reassigned the DVD key to operate a second VCR), and want to return to the default setting (for the example, DVD mode), follow these steps. Hold down P until red light blinks twice. Press the desired mode key (the key you want reassigned to factory default settings) twice. You can now set up codes for the original device. PROGRAMMING LEARNING You can program the four Smart keys (1S, 2S, 3S, and 4S) on your remote to learn a function that is unique to your home entertainment devices (for example, tracking up or down for a VCR). Note: Have your original remote controls handy before beginning learning programming. Important: If no key is pressed within 10 seconds, the remote control exits the programming. Learning Functions 1. Hold down P until the red light blinks twice. Press the device key that corresponds with the desired device's remote (TV, VCR, CBL/SAT, DVD, or AUX). Press the desired learning key (1S, 2S, 3S, or 4S). 14 Preparation 5. Place the device's remote control head-to-head (about 2 inches apart) with the 6-In-One Remote. [. . . ] Use and store the remote only in normal temperature environments. Handle the remote carefully; do not drop it. Keep the remote away from dust and dirt, 24 Troubleshooting and wipe it with a damp cloth occasionally to keep it looking new. Modifying or tampering with the remote's internal components can cause a malfunction and might invalidate its warranty. [. . . ]