User manual RANE ECM 64

[. . . ] OPERATORS MANUAL ECM 64 CONFERENCE SYSTEM Quick Start The ECM 64 is a very versatile product with many applications. This section will help you with basic setup, then use the Contents below to find the detail you need for your specific application. Although the ECM 64 or ECM 64AD are configured to operate `out of the box', to get the best performance please review this manual for proper configuration and alignment (see page Manual-12). The ECM 64AD includes both the DH 1 Digital Hybrid and the ECA 1 Echo Canceller. [. . . ] The selected device name is displayed at the top within the title bar. Alternatively, after Polling, the same device list appears in the Device Selection window. Select the connected or offline device from the list and click OK. The connected unit's Device Address is displayed within brackets [ ] to the left of the device name. Double-clicking on the device name is equivalent to selecting the device and clicking OK. If the installation changes by adding more RW 232 units, choose Device > Select, and the Poll button to make the computer recognize currently connected units. ECM 64 Devices can also be given custom names, tailored to your installation. Simply choose Device > Name Device, and the following screen appears. Memory & Security 64, along with other installation-specific information. Select System > Save Job File to support multiple installations. Returning to Device Edit from the Site Control panel requires a password. Right-click on the title bar to Select Device Edit (password required), or Exit the program. If more than 16 Memories are needed, they can be saved to disk and recalled later. Memory Selection Toolbar All of Rane's RW 232 products have 16 programmable Memories with one working Memory called Memory 0. Recalling a Memory replaces the working Memory with the selected Memory. The selected Memory is then displayed next to the Store button. All control changes are made to working Memory, not to the selected Memory. The selected Memory flashes whenever working Memory does not match it. To save these settings in one of the 16 Memories, simply click Store, and the Memory number key. After Storing, clicking any Memory number instantly recalls it. The 16 Memories are stored within the units non-volatile Memory, and recalled by: Selecting a Memory using RaneWare, or from a control system by a. Sending a Program channel from memory command, or b. Sending a Program all channels from memory on all devices command Recalling settings allows the room controller to make routing changes without affecting the input and output levels. [. . . ] If it is not practical for the Telephone Company to give an advanced notice, they will notify the customer as soon as possible. In addition, you will be advised of your right to file a complaint with the FCC. It is possible that the Telephone Company may make changes to their equipment, operations, facilities and/or procedures that could affect the operation of this equipment. Should this happen, the telephone company will provide advance notice of such changes for you to make the necessary modifications in your equipment. [. . . ]