User manual RANE RS 1 DATASHEET

[. . . ] DATA SHEET RS 1 120 VAC REMOTE POWER SUPPLY General Description The RS 1 Remote Power Supply is a general purpose AC to AC adapter designed to power any Rane products equipped with red AC remote power mod jacks. And since the output voltage is classified as safety extra-low voltage, then all units powered from this unit are exempt from safety agency approval requirements. The table-top design of the RS 1, along with a 2 meter line cord and the 2 meter output cable, allows it to be installed in any convenient location away from the powered unit and the AC outlet strip. [. . . ] Wait 15 minutes for the thermal switch to reach ambient temperature and reset itself. Caution--Damage to the power supply will occur if this supply is plugged into older Rane products with DC (black color) power jacks. Use only with AC (red color) power jacks. Limit 10% +10% 10% Units VAC mA VAC Conditions/Comments Rated load, 120 VAC line No-load/full-load, ±10% line 18 AWG, 6 feet long 26 AWG, 6 feet long Class 2 transformer U. L. 223 RS 1 With integral mounting tabs 0. 7 kg Parameter Output Voltage Maximum Output Current Max/Min Output Voltage Input Cord Output Cord Safety Agency . . . . . . . . . . U. L. Certified Maximum Power Line Voltage Enclosure Weight Specifications 18 CT (center-tap: 9+9) 750 23. 3 CT/16. 2 CT 2-Wire, 2-Prong AC Line Cord 6-Wire Modular RJ-12 Plug E90493 & E88261 LR91687 & LR58948 25 105-130 VAC, 50/60 Hz Black High Impact Plastic 1. 5 lb W RS 1 230 VAC REMOTE POWER SUPPLY DATA SHEET General Description The RS 1 Remote Power Supply is a general purpose AC to AC adapter designed to power any Rane products equipped with red AC remote power mod jacks. The RS 1 meets the EN 60950 Safety Standard and complies with the European EMC directive 89/336/EEC. And since the output voltage is classified as safety extra-low voltage, then all units powered from this unit are exempt from safety agency approval requirements. The 230VAC version of the RS 1 comes from the factory with an integral mounted Eurocord. The table-top design of the RS 1, along with the 2-meter line cord and the two meter output cable, allows installation in any convenient location away from the powered unit and the AC outlet strip. Convenient mounting tabs are integral to the rugged high impact housing. Indoor Use Only Safety Transformer CLASS II Double Insulated Thermal Switch Daisychaining Precautions: Daisychaining is acceptable only where balanced wiring is used exclusively, and the total current demand of all products being powered does not exceed the maximum output current rating. The connector wiring (see diagram) of the RS 1 allows for easy daisychaining. Plug a 6-wire modular wye adapter (male to 2 females) into the first product to be powered. Connect the RS 1 output cable into one side of this adapter, and then use another 6-wire mod cable from the other side of the adapter to the next unit. [. . . ] Om sladden skadas skall darfor transformatorn kasseras. Limit 10% +10% 10% Units VAC mA VAC Conditions/Comments Rated load, 230 VAC line No-load/full-load, ±10% line Eurocord, 2 meters long 26 AWG, 2 meters long Class II transformer E1 and E2 environments TUV approved with GS mark Parameter Output Voltage Maximum Output Current Max/Min Output Voltage Input Cord Output Cord Safety Agency . . . . . . . . . . EMC . . . . . . . . . . IEC . . . . . . . . . . Scandinavian Maximum Power Line Voltage Enclosure Weight Specifications 2x9 CT (center-tap: 9+9) 750 23. 3 CT/16. 2 CT Class II, CEE 7/16 6-Wire Modular RJ-12 Plug European Directive 89/336/EEC Meets EN 60950-1:2001 & EN 60065:2002 Approved Semko 20 190-250 VAC, 50/60 Hz Black High Impact Plastic 0. 7 kg W With integral mounting tabs ©Rane Corporation 10802 47th Ave. W. , Mukilteo WA 98275-5098 TEL 425-355-6000 FAX 425-347-7757 WEB www. rane. com All features & specifications subject to change without notice. [. . . ]