User manual RANE SL 3 QUICK START 2-0

[. . . ] The AUX input is usually DOWN for recording at Line level. (Optional) Connect the SL3 AUX OUTPUT to an additional Line input or Aux input on your mixer to output the sample player to its own mixer input. Using the provided USB cable, connect your SL 3 to an available USB 2. 0 port on your computer. Make sure you connect it directly to your computer and not through a hub or splitter. USB TO COMPUTER PLayINg REguLaR VINyL aNd CdS NOTE: the SL 3 must be powered by uSB or the supplied external power supply for the dECK THRus to work. [. . . ] Cancel the New Hardware Wizard if it pops up. If the CD doesn't start automatically, browse to the CD drive and run setup. exe. If you downloaded the installer in Windows XP as described in the previous section, doubleclick setup. exe on your desktop. If you downloaded the installer in Windows Vista or 7, double-click setup. exe in the compressed (zipped) folder. If a message tells you the software you are installing has not passed Windows logo testing, choose allow or Continue anyway. To change the directory you wish to install Scratch Live into, select Custom Install, otherwise choose Complete. Once the installation is complete, Scratch Live appears in the Start Menu under all Programs > Serato > Scratch Live. 5. When the download is complete, click Open. 2 RANE SL 3 FOR SERATO SCRATCH LIVE · QUICK START 2. 0 STEP 3: CaLIBRaTION calibration scope to adjust the shape of the inner ring. Use the scope zoom slider (1x to 16x) to zoom in or out as necessary. Note: If you have trouble getting the rings circular, try cleaning or changing your needles. If the image appears as a line, then one channel of the turntable is not working. See examples of SCOPE READING AND FIXES in the manual. Check the percentage (%) in the bottom right corner of each calibration scope, indicating the percentage of readable signal -- this number should be 80% to 100% when your system is calibrated properly. · If you aren't hearing audio, you should at the very least see the waveform move on the screen as the control vinyl or cd is playing. The meters next to the virtual deck should display sound levels. If not, check that you are using aBS or REL mode above the Virtual Deck. · If nothing is moving on the screen, recheck connections and then see the ADVANCED TROUBLESHOOTING TECHNIqUES in the manual. · Make sure you are playing the control vinyl from the beginning (outer part). When using the control CD, be certain you are playing from the beginning of Track 1. · In Setup, set the "Vinyl Start Offset" knobs located in the Vinyl Control tab to 0. · If you hear music when in INT mode but not in aBS or REL mode while using control vinyl or CDs, see SCOPE READING AND FIXES in the manual. A common problem is seeing a straight or diagonal line in the Scope View. This means you are either getting an uneven stereo signal or a mono signal. [. . . ] Move focus up / down through the library or crates. Note that if you have a song highlighted in the song view, and use shift - ctrl - you will move up or down through the library or crates. When you release the shift or ctrl key, the focus will go back to the song view so that you can move up and down through songs using . Open the track in your default MP3/WAV/OGG/AIF player. [. . . ]