User manual RANE TTM57

[. . . ] Click OK. TTM 57SL Connections Turntable connection 1. Connect your turntables to any of the PGM 1 and PGM 2 inputs on the back of the TTM 57SL. Set any of the little switches down that has a turntable connected to it. When connected properly, circles will be displayed within the scope view of the setup screen while playing the control records (see Calibrating Scratch LIVE in the manual for more info). [. . . ] Connect your CD players to any of the PGM 1 and PGM 2 inputs on the back of the TTM 57SL. Set any of the little switches with a CD player up to LINE. When connected properly, circles will be displayed within the scope view of the setup screen while playing the control CDs (see Calibrating Scratch LIVE in the manual for more info). Connect the USB cable from the TTM 57SL to your Mac or PC. Windows XP drivers need to be installed when connecting the SL 1 to a USB port on a PC. On some Windows machines, each USB port is treated separately, requiring a separate driver install for each USB port. Calibrating the Software When setting up Scratch LIVE in a new location, calibrate the software to the background noise picked up by the needles, cables and CD players. When using turntables, place the needles on the records with the motors off and switch to the setup screen. When using CD players, pause the CD and switch to the setup screen. Press and hold the estimate button for each side, letting go when the threshold setting is stable (usually about one second). In situations with lots of background noise, the threshold will need to be higher. Start the motors, and adjust the L/R Balance and P/A Balance next to each calibration scope to adjust the shape of the inner ring. Use the scope zoom slider (1x to 16x) to zoom in or out as necessary. If you have trouble getting the rings circular, try cleaning or changing your needles. If the image appears as a line, then one channel of the turntable is not working. See examples of problems and fixes on pages Manual-24-25. Check the percentage (%) in the bottom right corner of each calibration scope, indicating the percentage of readable signal -- this number should be close to 100% when your system is calibrated properly. TTM 57SL as a sound card The TTM 57SL will be available as a standard Windows sound card whenever Scratch LIVE is not running. It will replace the previous sound card and default to TTM57SL Line 2 (select D 2 on either of the PGM INPUTS). If you wish to change to Line 1 or back to your previous sound card when not using the TTM 57SL: 1. Start > Control Panel > Sounds and Audio Devices. Make changes using the drop menus for both Sound Playback and Sound Recording. Click OK. Keyboard shortcuts Key ctrl - L ctrl - R ctrl - F ctrl - A ctrl - C ctrl - E ctrl - V ctrl - X ctrl - Z shift - ctrl - shift - ctrl - These actions can be accessed directly from the computer keyboard. Version 1. 6 ctrl - P ctrl - N ctrl - O - or + tab ctrl - del and ctrl - backspace Delete the file from your library and send to the recycle bin. ctrl - shift - del and (Note to iTunes users: files in your iTunes library cannot be deleted this way). [. . . ] Find - moves the cursor to the search box. Move focus up / down through the library or crates. Note that if you have a song highlighted in the song view, and use shift - ctrl - you will move up or down through the library or crates. When you release the shift or ctrl key, the focus will go back to the song view so that you can move up and down through songs using . [. . . ]