User manual RAYMARINE A60 DUAL

[. . . ] A60 Dual Function Display Owner's Handbook Document number: 81295-1 Date: December 2006 Trademarks and registered trademarks Raymarine is a registered trademark of Raymarine plc. Navionics is a registered trademark of Navionics SpA. SanDisk is a registered trademark of SanDisk Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ] To de-activate this alarm, press any key. To set the cross track error (XTE) to zero and move the origin to the actual vessel position press RESTART XTE. To stop navigating to the waypoint, press STOP GOTO. Note: For more information on navigation, see Chapter 4: Using the Chartplotter. Navigating to a Waypoint Sent by NMEA You can go to a waypoint that you have imported from another device (such as another Raymarine display) via NMEA. The waypoint appears on the A60 display just as if it were located in the A60's own waypoint database. D9800-1 RESTART RESTART XTE. . . Chapter 3: Working with Waypoints 55 On the sending device: 1. Ensure the unit is powered on and connected to the A60's NMEA port via a suitable cable. Select the desired waypoint and export it via the NMEA port. The GOTO NMEA soft key is grayed out until the waypoint is received. When the GOTO NMEA key is no longer grayed out, press it. The waypoint appears, along with bearing lines to it. 3. 4 Viewing Waypoint Information You can view the details of any waypoint that you have placed by either selecting it with the cursor or by selecting it on the waypoint list. Once you are viewing a waypoint's details, a variety of editing and managing options are available. . . . using the cursor You can select a waypoint with the cursor and view its details provided that the waypoint is not being navigated to: 1. Move the cursor over the waypoint you wish to view. The cursor changes color and the information for the selected waypoint is displayed in a data box. The soft keys change to show you are working with a waypoint. This displays the waypoint information in a dialog box. See "Editing a Waypoint" on page 57. Press ENTER or CANCEL again to return to normal operation. D8808-2 56 A60 Dual Function Display . . . using the waypoint list The Waypoint List shows all the waypoints that have been placed and displays details of the selected waypoint. The Waypoint List is displayed. Waypoint List Waypoint List SYMBOL NAME WPT 0001 REV & EDIT WAYPOINTS. . . WPT 0002 WPT 0003 WPT 0004 WPT 0005 Position Comment BRG 042 T F N 26 15. 247 W 080 04. 612 RNG 1. 25 nm Temp. [. . . ] DC DSM GPS Head Up Orientation Direct Current Digital Sounder Module Global Positioning System Displays the chart with your boat's current heading upwards. As the heading changes the boat symbol remains fixed and the chart picture rotates accordingly. The direction the boat is moving, as measured by a compass. This measurement differs from Course Over Ground (COG), which also takes into account factors that may alter your course due to winds, currents, etc. [. . . ]