User manual RAYMARINE APELCO DXL-6800 LORAN C NAVIGATOR

[. . . ] Copyright Raytheon Marine Europe 1998 Apelco GPS11 Installation and Operation Handbook Package Contents Checking your GPS11 Package The GPS11 package contains the following standard items: 1. Display unit with an internal antenna 2. Warranty document (GPS11 plus only) (GPS11 plus only) Items Missing? If any of the above items are missing or damaged, please contact your Apelco dealer or our Product Support Department to obtain replacement parts. Please note that missing or damaged items cannot be replaced without proof of purchase. Registering this Product Once you have checked that you have all of the listed components, please take the time to complete the warranty document and return it to your national distributor. [. . . ] on the menu bar and pressing the ENTER button details regarding a differential fix may be viewed. difinfo RECEPTION QUALITY The bargraph shows the reception quality with a full bar indicating 100% reception DGPS STATION The identification number of the differential station being received will appear automatically. CORRECTED SATS The satellites which are being corrected by the differential station will be indicated by their identification numbers. Chapter 4: Operation 29 4. 2 Position Page This page gives your primary position information along with speed and course over the ground. pos01 There are no menu options on this page. 4. 3 Waypoint Data Page This page gives your primary waypoint information. Use this page for entering, deleting or editing waypoint information and activating a waypoint. wayp01 There are three menu options "ACTI?", "EDIT?" and "DISP?" Highlighting "DISP?" on the menu bar will allow the choice of Data, CDI or BDI display. 30 Apelco GPS11 Installation and Operation Handbook Waypoint Display Page From the main waypoint page highlight the "DISP?" option and press "ENTER" you will be presented with three options: Data CDI Shows the main waypoint information page Shows the Course Direction Indicator Page Active waypoint information CDI01 BDI Shows the Bearing Direction Indicator Page BDI01 Chapter 4: Operation 31 Entering, Modifying and Deleting Waypoints From the main Waypoint information page select the menu option "EDIT?" and press the ENTER button. The menu changes to allow three options ENTER?, MODIFY?and DELETE? edit01 Entering a Waypoint Select ENTER?on the menu bar and press the ENTER button. A blank waypoint data page will appear. editwp 32 Apelco GPS11 Installation and Operation Handbook The highlighted setting is WPT:, press ENTER to select the waypoint name option. wptname Use the trackpad up and down arrows to select the first letter or number of your waypoint name then use the right arrow to move on to the next digit. Continue until the waypoint name is complete (max. Use the down arrow to highlight LATITUDE: and press ENTER. lat Use the up and down arrows to select the digits and the right and left arrows to move around until the correct waypoint latitude has been entered. Use the down arrow to highlight LONGITUDE?and press ENTER. lon Repeat the above procedure to enter the correct waypoint longitude. Chapter 4: Operation 33 Use the down arrow to highlight COMMENT: and press ENTER. comment If desired a 20 digit comment may be added to assist later in identifying the waypoint, select letters and numbers as before and press ENTER to complete the waypoint information. wptcompl Check the data entered carefully and, with the VALID?setting highlight on the menu press ENTER to save the information. If the information is incorrect you may use the trackpad arrows to go back and highlight the setting to be changed or highlight CLEAR?on the menu bar to clear the form and start again To stop tracking to a waypoint highlight "ACTI?" on the menu bar and press ENTER. "DEACTIVATE?" will be highlight on the menu bar. Press ENTER, a warning page will be displayed. stopwarn Press ENTER to stop tracking to that waypoint. 38 Apelco GPS11 Installation and Operation Handbook 4. 4 Route Data Page This page gives your primary route information. Use this page for entering, deleting or editing route information and activating a stored route. route01 There are three menu options "ACTI?", "EDIT?" and "DISP?" Highlighting "DISP?" on the menu bar will allow the choice of Data, CDI or BDI displays as indicated on page 30 Waypoint Display Page. Chapter 4: Operation 39 Editing a route Highlight "EDIT?" from the menu bar and press ENTER. Three options are given: "ENTER?", "MODIFY?" and "DELETE?" Entering a Route Select ENTER?on the menu bar and press the ENTER button. A blank Route data page will appear. edit02 The highlighted setting is RTE:, press ENTER to select the Route number option. rtename Use the trackpad arrows to select the number (00 to 19) of the new route and press "ENTER". If the route number has already been used, the previously entered route information will be displayed whereas if the route is new the data sheet will be empty. Use the down arrow to highlight the first waypoint line and press ENTER. 40 Apelco GPS11 Installation and Operation Handbook rtewpt01 Use the trackpad to enter the desired waypoint name. As you enter the individual numbers or letters the first matching entry in the waypoint library will be displayed. [. . . ] Use small amounts of a silicon based grease to prevent corrosion on exposed connectors. Chapter 6: Specification 53 Chapter 6: Specification Dimensions Size: Weight: 51 x 150 x 33 mm 2. 01" x 5. 90" x 1. 30" 255g ( 9 oz. ) with batteries LCD Display: 100 x 64 FSTN with EL back light. Receiver Frequency: Type: Antenna: Maximum Speed: 3 Dimensions: Pos. 8 genuine parallel channels with phase tracking (predicts the next 4 in view). Patch internal / integrated antenna 2000km/hour Latitude, Longitude and Altitude; requires 4 or more satellates 1 second Automatic Selection of Satellites Automatic Almanac update Autolocalization Accuracy Horizontal Position: with SA code : 100m RMS (2D) in RTCM 104 differential mode : 2 to 5 m RMS. Velocity: Acceleration: with SA code : 1. 0km/hour RMS in differential mode : 0. 1 km/hour 3g 54 Apelco GPS11 Installation and Operation Handbook Time to First Fix (typical) Reaquisition: Up to 1 hour off: Up to 24 hours off: Worldwide cold start: 4 seconds 30 seconds 90 seconds 3 minutes Power Supply Batteries: External Supply: Battery Life: 4 AA alkaline batteries 10-32v dc 8 hrs in continuous permanent mode. [. . . ]