User manual RAYMARINE C-SERIES

[. . . ] General Operation The control panel Card No. 1 DATA Press to access ruler, chart vectors, archive & transfer and data bar on/off functions. ACTIVE When multiple windows are open: - Press to select required window. - Press and hold to maximize current window. - Press again to return to multiple windows. PAGE Press to scroll through available pages. [. . . ] Measure the distance between two points. Distinguish between fixed & moving objects (radar overlay). Chart view Local Status bar Chart boundary Gully Ridge Portside Port point Creek point Route Cursor Waypoint Active waypoint Current position Cartographic object Track How do I move around the chart? To change the scale: OUT RANGE IN To pan the chart: Moves cursor. When cursor reaches window edge, chart pans to a different area. Press and hold to pan larger areas. Press RANGE (OUT) to see a larger area of the chart. Press RANGE (IN) to see a smaller area in more detail. How do I find where I am on the chart? If you cannot find your boat symbol : The screen automatically pans to your boat's position and re-activiates the motion mode (see Card 6) The boat symbol indicates your position. FIND SHIP CURSOR ? D6727-4 More information . See 'Using the Chart' chapter of the E-Series Reference Manual Basic Navigation Card No. 8 Working with Waypoints What is a waypoint? WAYPOINT AT CURSOR WAYPOINT AT VESSEL WAYPOINT AT LAT/LON GO TO WAYPOINT OPTIONS REVIEW AND EDIT WAYPOINTS A waypoint is a position marked on a chart, radar or fishfinder screen to indicate a site (for fishing, diving etc), or as a position to go to. You can place a waypoint at the cursor position, your boat's position or at a specified position. Waypoints are represented in chart or radar applications as an 'X' (default) and by a vertical line labeled WPT in Fishfinder. Active waypoints are displayed on CDI windows. The details of each waypoint are stored in a waypoint list (1000 waypoints maximum). Waypoints can be renamed, edited, grouped, or erased, as necessary. To make full use of waypoint features, ensure your display is receiving heading and position data. We recommend that you regularly back-up your waypoints by archiving them to a CompactFlash card. Waypoints can also be transferred to another NMEA compatible instrument. Waypoint How do I place a waypoint? . . . at the cursor? WPTS/ MOB WAYPOINT AT CURSOR . . . at the vessel? WPTS/ MOB WAYPOINT AT VESSEL WPT Move cursor to position Alternatively, press WPTS/MOB twice. How do I navigate to a point? GOTO. . . GOTO CURSOR Move cursor to position CAUTION Always check that your route to a waypoint is safe before travelling towards it. How do I navigate to a waypoint? . . . using the waypoint list? Waypoint list WPTS/ MOB GO TO WAYPOINT OPTIONS. . . Name: Waypoint 1 Waypoint 2 Waypoint 3 Group: Position: Rng/Brg: My Waypoint 50 53'. 826N o 001 10'. 963W 284 o o GO TO WAYPOINT 4. 315nm Temperature: Depth: Date: Time: ---. -O F ---. -ft 05/11/2003 14:59:11 Highlight required waypoint . . . using the cursor? GO TO WAYPOINT WPT To stop navigation to a waypoint: GOTO. . . OR: WPT STOP GOTO Place cursor over waypoint. Move cursor to required position Can I edit a waypoint? Once a waypoint has been placed it can be edited in as variety of ways. You can: Change the waypoint details Move a waypoint. Change the default group or symbol Erase a waypoint D8937_1 ?See the 'Working with Waypoints' chapter of the Reference Manual What is around me? Card No. [. . . ] Using the range controls will affect all fishfinder windows. OUT RANGE IN D6585-1 Turn RANGE AUTO MAN OUT RANGE IN D6585-1 RANGE SHIFT xx FT Press RANGE (IN or OUT) IN - decrease depth. OUT - increase depth. Turn to alter shift value. How do I change the operating frequency? Auto mode - automatically selects 50 kHz or 200 kHz. Manual (MAN) - Single or dual 200 kHz - for maximum definition in shallow water. FISHFINDER SETTINGS. . . 50 kHz - for maximum depth penetration in deep water. FREQUENCY AUTO MAN FREQ MODE SINGLE DUAL Both - 200 kHz & 50 kHz displayed simultaneously. Only available if FREQ MODE set to DUAL. SELECT FREQ 200 50 BOTH Select MAN Select DUAL frequency mode Select required frequency How do I change the gain mode? The system automatically adjusts the gain control to display the sharpest image. [. . . ]