User manual RAYMARINE HSB CHARTPLOTTER

[. . . ] Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. HSB Series Chartplotter owner's handbook Document number: 81150_1 Date: 18th September 1998 HSB Series Chartplotter HSB Series Chartplotter Installation and Operation Handbook SAFETY NOTICES 1. The display unit contains high voltages. Adjustments require specialised service procedures and tools only available to qualified service technicians ­ there are no user serviceable parts or adjustments. [. . . ] If selected, the waypoint data box is displayed for the target waypoint. Press the MORE soft key to access the SAVE ROUTE function, or ENTER to return to the default display. Note: The completed route is stored in the display unit, and will be redisplayed if you turn the unit off and on again. However, on an integrated system it is possible for a current route from another unit to overwrite this route; it is recommended that you Save the route as described. UNDO WAYPOINT ACCEPT ROUTE Chapter 3: Waypoints, Routes and Tracks 53 Saving the Current Route You can save up to 20 named routes in the route database list. These routes can then be re-displayed and followed at a later date. Note: If the current route has not been saved, when you attempt an operation that affects this route, e. g. CLEAR ROUTE, you are prompted to save it. ® To save and name the current route: 1. To access the SAVE ROUTE soft key, press the ROUTE soft key, followed by MORE. Saving the Current Route SAVE ROUTE 2. The Route List pop-up and the NAME ROUTE soft keys are displayed. The next available entry on the route list is highlighted. (If required, you can use the trackpad to select another position in the list; this can be a blank slot, or an existing route that you no longer require). SAVE ROUTE 1 2 3 4 5 EMPTY EMPTY EMPTY EMPTY EMPTY NAME ROUTE?If you do not wish to name or re-name the route, press the NO soft key (or ENTER) to clear the list. The route is saved and is listed as Route Not Named. 54 HSB Series Chartplotter If you wish to name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number. Press ENTER to finish and clear the Name List, then to return to the default soft key display, press ENTER again. Clearing the Current Route You can clear the current route from the screen. When you select CLEAR ROUTE if the current route has not been saved, you have the option of saving it and, if you are following the current route, you have the option to stop. ® To clear the current route: CLEAR ROUTE Clearing the Current Route & Retrieving a Route 1. Press the ROUTE default soft key or place the cursor over a route leg until the text RTE is displayed. If you are following the current route the STOP FOLLOW soft keys are displayed. [. . . ] This Warranty does not cover routine system checkouts or alignment/calibration, unless required by replacement of part(s) in the area being aligned. A suitable proof of purchase, showing date, place, and serial number must be made available to Raytheon Marine Company or authorized service agent at the time of request for Warranty service. Consumable items, (such as: Chart paper, lamps, fuses, batteries, styli, stylus/drive belts, radar mixer crystals/ diodes, snap-in impeller carriers, impellers, impeller bearings, and impeller shaft) are specifically excluded from this Warranty. Magnetrons, Cathode Ray Tubes (CRT), hailer horns and transducers are warranted for 1 year/12 months from date of sale. [. . . ]