User manual RAYMARINE RAYNAV 300 QUICK REFERENCE CARD

[. . . ] - Press and hold for 2 seconds to activate or cancel MOB. DISPLAY Controls display mode pages. - Press repeatedly to toggle through display modes. - Press and hold for 2 seconds for default display. [. . . ] Press for 3 seconds to turn off display. POWER Press momentarily to access lighting and contrast. OFF O F F LIGHT ENTER Confirms selection and (if appropriate) clears current soft key labels. It either performs the selected task, accepts changes, or leads to display of more options. When cursor text is displayed, cursor takes control of the object. When arrow-head cursor symbol is displayed, the object under cursor control is dropped. SYSTEM SET UP¬ PLOTTER SET UP¬ TRACK SET UP¬ GPS SET UP¬ Press soft key to display required setup menu, then use trackpad to select option and soft key to change setting. Press ENTER to close menu and CLEAR to finish. D5832-1 50% CONTRAST Select a slider using the soft key or trackpad left/right. Press ENTER to finish. CLEAR Cancels operation in progress and returns to the previous display. Bridge Card Raynav 300 GPS Plotter 86053_4 Waypoint List Press MARK then WAYPOINT LIST. Press EDIT WAYPOINT to change its SYMBOL, NAME, POSITION; ERASE WPT to remove the Waypoint from the list or GOTO WAYPOINT to navigate towards the selected Waypoint. Press MAKE NEW WAYPOINT to place a new Waypoint at vessel's current position and edit it immediately. Press WAYPOINT TRANSFER to Send or Receive Waypoints via NMEA. Route List Press ROUTE then MORE. . . Press ROUTE LIST to display the Route List on screen. Use the trackpad to select the required Route. Press SHOW ROUTE to display the Route on screen. Press ERASE ROUTE to delete the Route or. . . Press ROUTE INFO to display the selected Route's details. Press NAME ROUTE to name the Route or. . . TRACKPAD TO SELECT ROUTE, SOFTKEYS TO SELECT ACTION, "CLEAR" TO CLOSE MENU Display Options Press POWER . . . [. . . ] To remove a Waypoint from the ROUTES column, use the trackpad to highlight the Waypoint then press REMOVE WAYPOINT. Press ACCEPT ROUTE or ENTER to complete the Route. To cancel the operation, press CLEAR twice to return to the main Plotter screen. [. . . ]