User manual RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE. We hope that this RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE user guide will be useful to you.
Lastmanuals help download the user guide RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE.
Manual abstract: user guide RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE
Detailed instructions for use are in the User's Guide.
[. . . ] It should NOT be connected to the control unit.
ST4000 and ST5000 autopilots
The main difference with older ST4000 and ST5000 control units is that the SeaTalk connections at the control unit will require spades (part number: D211).
ST4000 or ST5000 D177 (Not supplied)
RYS
5A fuse
Screen (SeaTalk ground) Yellow (SeaTalk data)
Terminal stripes
Red (+12 V)
Hand-held remote
12 V
D5685-1
Owner's Handbook
7
ST6000+, ST6001+, ST7000+ and ST7001+ pilots
ST6000+, ST6001+, ST7001+ or ST7000+ ST6001+/ST6000+ ST7001+/ST7000+ Hand-held remote
150/400 Course Computer
Screen (SeaTalk ground) Yellow (SeaTalk data)
Terminal stripes
Red (+12 V)
D5687-1
ST6000 and ST7000 autopilots
The main difference when connecting older ST6000 and ST7000 autopilots is that you will need a SeaTalk cable with round plugs.
ST6000 or ST7000 ST6000 ST7000 Hand-held remote
100/300 Course Computer
Screen (SeaTalk ground) Yellow (SeaTalk data) Terminal stripes
Red (+12 V)
D5688-1
8
SeaTalk Autopilot Hand-held Remote
SportPilot and SportPilot Plus
To connect the hand-held remote to the SportPilot you will need to purchase an appropriate SeaTalk interface cable (D229). The red core should also be fitted with a 5 A fuse.
SportPilot or SportPilot Plus
Terminal stripes Red (+12 V)
Screen (SeaTalk ground) Yellow (SeaTalk data)
YSR 5A fuse
12 V
D5689-1
Note: If you intend to locate the remote close to the SportPilot, the SportPilot's power cable has two additional wires (yellow and screen) that you can use to connect the SeaTalk socket to the pilot. However, a fused positive (+) connection from the power source to the socket will be required.
Owner's Handbook
9
SeaTalk cables
Because you can use the hand-held remote with a wide range of Raymarine autopilots, you will need to purchase the appropriate SeaTalk cable to connect the hand-held remote to the autopilot via the SeaTalk system.
Extension cables - flat moulded plugs at each end
Part no. D284 D285 D286 D287 D288
Type Flat moulded plugs at each end Flat moulded plugs at each end Flat moulded plugs at each end Flat moulded plugs at each end Flat moulded plugs at each end
Length 1 m (3 ft 3 in) 3 m (9 ft 10 in) 5 m (16 ft 5 in) 9 m (29 ft 6 in) 20 m (65 ft 6 in)
Conversion cables - flat moulded plug to round plug
Part no. [. . . ] Check the remote socket connections and the security of all SeaTalk connectors and cables.
Unit does not operate autopilot
·
Autopilot not in Auto mode.
Note: No audible beep will be heard when operating the hand held remote.
Spares List
The following items may be purchased from your local Raymarine dealer should you need them.
Part Number D161 D162 D211 D224 D330 Description SeaTalk socket assembly only Plug and socket assembly Spade connector kit for ST4000 and ST5000 Hand-held remote storing bracket Socket O-ring
Owner's Handbook
13
SeaTalk socket template
Drill 2. 5 mm (3/32 inch) diameter hole (2 positions)
Drill 18 mm (23/32 inch) diameter hole
D5658-1
14
SeaTalk Autopilot Hand-held Remote
Raymarine EMC Guidelines
EMC Installation & Service Guidelines
IMPORTANT NOTE
All Raymarine equipment and accessories are designed to the best industry standards for use in the leisure marine environment. When powered up, all electrical equipment produces electromagnetic fields. These can cause adjacent pieces of electrical equipment to interact with one another, with a consequent adverse effect on operation. In order to minimise these effects and enable you to get the best possible performance from your Raymarine equipment, these guidelines are provided to enable you to ensure minimum interaction between different items of equipment, i. e. ensure optimum Electromagnetic Compatibility (EMC). The design and manufacture of Raymarine equipment and accessories conform to the appropriate EMC standards, but correct installation is required to ensure that performance is not compromised. Although every effort has been taken to ensure that they will perform under all conditions, it is important to understand what factors could affect the operation of the product. Please keep this document for future reference.
Safety
Some products generate high voltages, so never handle the cables/connectors when power is being supplied to the equipment.
Installation
These guidelines describe the conditions for optimum EMC performance, but it is recognised that it may not be possible to meet all of these conditions in all situations. To ensure the best possible conditions for EMC performance within the constraints imposed by any location, always ensure the maximum separation possible between different items of electrical equipment. For optimum EMC performance, it is recommended that wherever possible: · Raymarine equipment and cables connected to it are: · At least 1 m (3 ft) from any equipment transmitting or cables carrying radio signals e. g. In the case of SSB radios, the distance should be increased to 2 m (7 ft). · More than 2 m (7 ft) from the path of a radar beam. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element. · The equipment is supplied from a separate battery from that used for engine start. Voltage drops below 10 V in the power supply to our products, and starter motor transients, can cause the equipment to reset. This will not damage the equipment, but may cause the loss of some information and may change the operating mode.
Raymarine EMC Guidelines
·
·
Raymarine specified cables are used at all times. Cutting and rejoining these cables can compromise EMC performance and so must be avoided unless doing so is detailed in the installation manual. If a suppression ferrite is attached to a cable, this ferrite should not be removed. If the ferrite needs to be removed during installation it must be reassembled in the same position.
Suppression Ferrites
The following illustration shows typical cable suppression ferrites fitted to Raymarine equipment. Always use the ferrites supplied by Raymarine.
D3548-2
Connections to Other Equipment
If your Raymarine equipment is to be connected to other equipment using a cable not supplied by Raymarine, a suppression ferrite MUST always be fitted to the cable close to the Raymarine unit.
Check Before Going to Sea
Always check the installation before going to sea to make sure that it is not affected by radio transmissions, engine starting etc.
Servicing
Raymarine equipment should be serviced only by authorised Raymarine service technicians. [. . . ] Travel costs which are excluded from the coverage of this Warranty include but are not limited to: taxi, launch fees, aircraft rental, subsistence, customs, shipping and communication charges etc. Travel costs, mileage and time, in excess to that allowed must have prior approval in writing. TO THE EXTENT CONSISTENT WITH STATE AND FEDERAL LAW: (1) THIS WARRANTY IS STRICTLY LIMITED TO THE TERMS INDICATED HEREIN, AND NO OTHER WARRANTIES OR REMEDIES SHALL BE BINDING ON RAYMARINE INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABLE OR FITNESS FOR A PARTICULAR PURPOSE. (2) Raymarine shall not be liable for any incidental, consequential or special (including punitive or multiple) damages. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual RAYMARINE SEATALK AUTOPILOT HAND-HELD REMOTE will begin.