User manual RAYMARINE SL PLUS CHARTPLOTTER DISPLAYS

[. . . ] SL520/530/631 PLUS Chartplotter Display Owner's Handbook Document number: 81209_1 Date: September 2002 iii SL520/530/631 PLUS Chartplotter Display Owner's Handbook September 2002 INTENDED USE The display units detailed in this handbook may form part of navigational radar systems intended for light marine use. These displays and radar systems are only an aid to navigation. SAFETY NOTICES This equipment must be installed and operated in accordance with the instructions contained in this manual. Failure to do so can result in personal injury and/or navigational inaccuracies. The LCD display unit unit contains high voltages. [. . . ] To access the SAVE ROUTE soft key, press the ROUTE soft key, followed by MORE. The save route pop-up and the NAME ROUTE soft keys are displayed as illustrated in Figure 3-6. The next available entry on the route list is highlighted. (If required, you can use the trackpad to select another position in the list; this can be a blank slot, or an existing route that you no longer require). SAVE ROUTE 1 2 3 4 5 EMPTY EMPTY EMPTY EMPTY EMPTY SAVE ROUTE Saving the Current Route NAME ROUTE?YES NO D4155-1 Figure 3-6: Save Route Window 4. If you do not wish to name or re-name the route, press the NO soft key to clear the list. The route is saved and is listed as Route Not Named. If you wish to name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number. Chapter 3: Standard Chart Operations 3-23 You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator Keypad on page 3-15) to name the route. Press ENTER to finish and clear the Name List, or press CLEAR to cancel the operation. To return to the default soft key display, press ENTER again. Clearing the Current Route You can clear the current route from the screen. When you select CLEAR ROUTE if the current route has not been saved, you have the option of saving it and, if you are following the current route, you have the option to stop. To clear the current route: ROUTE RTE STOP FOLLOW 2. If you are following the current route the STOP FOLLOW soft keys are displayed. To stop following and clear the route press YES. If the route has not been saved the SAVE ROUTE soft keys are displayed. To clear the route, without saving it in the route database, press NO. To save the route in the database, press YES. The Name route soft keys are displayed and you should continue as described in the previous section, Saving the Current Route on page 3-22. The current route is cleared from the screen and the default soft keys are displayed. You can now use the ROUTE soft keys to make a route, or to show another route from the database. SAVE ROUTE Retrieve a Route From the Database You can select a route as the current route from the database list. [. . . ] The Installed Warranty provides for onboard repair or exchange, by Raymarine or it's approved service agents, for a period of 2 years/24 months, from date of sale of the boat to the end user ­ where the equipment has been installed by a Raymarine certified installer, or from commissioning of the installation by a Raymarine certified installer, or 30 months from date of shipment of the equipment from Raymarine ­ whichever expires first, except as provided below. Obtaining Warranty Service In the event of Warranty service being required, contact Raymarine or the nearest Raymarine certified service agent ­ a full list of local service agents are available on the Internet or can be requested from the nearest Raymarine agent. A suitable proof of purchase, showing date, place of purchase, and serial number must be made available to Raymarine or authorized service agent at the time of request for Warranty service. In cases where a Raymarine certified installer has not installed the product; i. e. Limited Warranty, the affected unit must be returned to the local Raymarine approved service agent, with a copy of proof of purchase and/or completed warranty card. [. . . ]