User manual RCA LCDX2620W

[. . . ] LCD Television User's Guide Changing Entertainment. Again. Important Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. This symbol indicates important instructions accompanying the product. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. [. . . ] Set DVD Ch/Input Lets you set up the channel the TV tunes to when you press the DVD button. Set SAT Ch/Input Not available with your remote control. Set AUX Ch/Input Not available with your remote control. Press the right arrow button to select the choice that matches the way you have the component connected to this TV. 5. The choices and a brief explanation follow: Chapter 3 Graphics contained within this publication are for representation only. 15 Using the TV's Features Autotuning Set VCR Ch/Input Set DVD Ch/Input Set SAT Ch/Input Set AUX Ch/Input 03. . N/A Choose this if you don't have this particular component connected to the TV, or if you don't want the TV to automatically tune to the correct channel when you're using this component. 03/04 Component is connected to the Antenna/Cable jack on the TV, and you want the TV to tune to channel 3 or 4 (VCR only) when you press the corresponding button on the remote. Reminder: make sure the component's Channel 3/4 switch is set to the appropriate channel. VID1 Component is connected to the VID1 Video In or S-Video In jack on the TV and you want the TV to tune to a video input channel when you press the corresponding button. Press </> or OK to select. Press MENU to go to Setup Menu. CMPT Component is connected to the Y Pb Pr jacks on the TV and you want the TV to tune to the component video input channel when you press the corresponding button. RGB Component is connected to the RGB jack on the TV and you want the TV to tune to the RGB input channel when you press the corresponding button. DVI Component is connected to the DVI jack on the TV and you want the TV to tune to the DVI video input channel when you press the corresponding button. PIP (Picture-in-PC) Operation The PIP (Picture-In-PC) feature lets you display a second, smaller analog (NTSC format) picture on top of the PC picture. You will only be able to use the PIP window with analog channels. Using the PIP Feature The PIP feature works with a component that is connected to your TV that has a tuner that displays analog (NTSC) channels. While you may use PIP in different ways, this basic PIP scenario should get you started. When tuned to your PC input, follow these steps. Turn Picture in PC on from the PC Picture Quality menu. Press the INPUT button to view PIP from another input channel. Use the CH+ or CH- button to change the PIP channel. Press CLEAR to clear PIP. PIP Problems? · If you press PIP and the PIP window is gray, you may have activated the Parental Control feature and the program exceeds the rating limits you set. For information on removing limits, see the following section. You cannot view closed captioning in the PIP window. PIP cannot be displayed from component (Y, Pb, Pr) inputs. · · 16 Graphics contained within this publication are for representation only. Chapter 3 Using the TV's Features Parental Control US V-Chip. V-Chip Unrated/Exempt Front Panel Block Channel Block. [. . . ] RCR311TBM2 260605 $24. 99 Standard Audio/Video cable with RCA-type phono plugs. VH83 $5. 95 2-way Signal Splitter: Helps you connect to a second TV or VCR. VH47 $3. 95 CLEAR MENU OK PRESETS CC GUIDE INFO SKIP 1 4 7 INPUT 2 5 8 0 3 6 9 ANTENNA REVERSE PLAY FORWARD RECORD STOP PAUSE AGAIN SPEED ZOOM SEARCH OPEN CLOSE Component Video Cables: Connect to the 15 pin D-sub to component cable adapter and connect the other end to Y, Pr, Pb jacks. DT6DC (6-ft) $24. 95 DT12DC (12-ft) $34. 95 reset protected busy Amplified VHF/UHF/FM Antenna: Allows you to easily switch from the antenna signal to cable or satellite easily without disconnecting antenna. [. . . ]