User manual RCA RCU 900

[. . . ] RCU900_IB_revC. qxp 12/3/02 9:45 Page 1 Universal Learning Remote with TOUCHSCREEN User's Guide Limited 90 Day Warranty RCU900 remote RCU900_IB_revC. qxp 12/3/02 9:45 Page 2 Table of Contents Introduction . . 17 Clear All Stored Learned Commands Under A Mode . . 22 TV or CD/Audio Volume Punch-through . . 36 2 RCU900_IB_revC. qxp 12/3/02 9:45 Page 3 Universal Learning Remote with Touchscreen Congratulations on your purchase of the RCU900 by RCA. [. . . ] The LED indicator light blinks once to indicate acceptance of the keypress. The Macro deletion is complete and the Main Setup Screen will be shown. Press LCD CLEAR on the Main Setup Screen to exit Setup Mode. If you are in the process of deleting a Smart Macro and you decide not to delete it, you can abort the deletion process by pressing the LCD CLEAR key. Sleep Timer Love to go to sleep with the TV on in the background?With the RCU900, you can program your TV to turn off after a period of time (from one to 99 minutes). The LCD SLEEP key is used to set the Sleep Timer and is only available in the main TV Mode. The SLEEP key is not displayed for any mode other than TV. The TV Off command is sent at the end of the time period to turn the TV off. You can set the Sleep Timer in two ways. Method 1 (From Normal Operation) To set your Sleep Timer from normal operation, follow these steps: 1. Press the TV device key on the rubber keypad. Press the LCD SCREEN key to switch to the second TV screen on the touchscreen, which shows the LCD SLEEP key. Press and hold the LCD SLEEP key in TV Screen 2 until the LED indicator light remains on and the touchscreen shows the Sleep Setup Screen. This process takes approximately 2-3 seconds. 21 RCU900_IB_revC. qxp 12/3/02 9:45 Page 22 Method 1 (continued) 4. Press and release the numeric keys indicating the number of minutes (01-99) you wish to set on the Sleep Timer. The LED indicator light blinks once to indicate acceptance of the keypress and the screen returns to normal operation. When using the Sleep Timer feature, leave the remote pointing towards the TV with an unobstructed path. Method 2 (From Setup Routine) To set your Sleep Timer from the Setup routine, follow these steps: 1. Press the TV device key on the rubber keypad. Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds. The LED indicator light blinks once to indicate acceptance of the keypress. The touchscreen now shows the Sleep Setup Screen. Press and release the numeric keys indicating the number of minutes (01-99) you wish to set on the Sleep Timer. [. . . ] . 057, 112, 121, 135, 167, 206, 207, 210, 211, 212, 215, 218, 219 Realistic . . 118, 137, 138, 139, 173, 174, 175, 176, 183 Teac . . 056, 076, 131, 150, 155, 163, 203, 204 Venturer . . 141, 142, 178, 180, 181, 186, 187, 188, 189 Zenith . [. . . ]