User manual RCA SYSTEMLINK 3

[. . . ] PREV CH PREV CH allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall button on your original remote. 0-9 The number buttons operate the same as on your original remote, and are used for entering device codes or channel numbers. MENU The MENU button calls up the TV set up menu. Programming For TV 1. [. . . ] The number which causes the INDICATOR LIGHT to blink is the first digit of your code. Repeat step 4 until you have retrieved all three numbers in the code. CODE SEARCH (OFF) (BLINK) 0 9 1. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. Press and release the device button for the device you are programming (TV, VCR/DVD or DBS/CABLE). The INDICATOR LIGHT will blink once then remain lit. Press and release OFF/ON until your device turns off. Important: You may have to press OFF/ON up to 200 times. CODE SEARCH . . . INDICATOR LIGHT DBS/ CABLE VCR/ DVD TV (BLINK) OFF/ON 5. When your device turns off, press the ENTER button, the INDICATOR LIGHT will go off. ENTER (OFF) 9 10 RCU300 Manual 12/11/01 11:51 AM Page 12 Television Menu Function The TV Menu is used to make changes in the TV settings such as setting color, channels, timers, etc. Push the MENU button. TV DBS Menu Function The DBS Menu is used to navigate thru the Guide screens, to make changes in the DBS settings such as channel lists, passwords, etc. Push the DBS·CABLE button on the remote. Push the MENU key. DBS/ CABLE This puts the remote in TV Menu Mode. The TV Menu should now be visible on the television. The INDICATOR LIGHT will blink continuously to indicate the remote is now in TV Menu Mode. While in TV MENU these buttons will function as follows: VOL UP/DOWN buttons will operate as CURSOR RIGHT/LEFT. CHAN+/- keys will operate as CURSOR UP/DOWN. For RCA, GE, ProScan TVs pushing the MENU button will select the highlighted item. The numeric buttons may also be used to select the MENU choice. MENU (BLINK) This puts the remote in DBS Menu Mode. The DBS Menu should now be visible on the television. The INDICATOR LIGHT will blink continuously to indicate the remote is now in DBS Menu Mode. While in DBS MENU MODE these buttons will function as follows: VOLUME UP/DOWN button will operate as CURSOR RIGHT/LEFT. MENU (BLINK) VOL VOL CHAN CHAN CH+/- button will operate as CURSOR UP/DOWN. MENU Note: Not all functions in competitive models and brands of televisions may be fully supported. Exiting the TV Menu Mode: To exit the Menu Mode and clear the TV screen push the TV button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of TV Menu Mode and will revert to it's normal mode of operation. Note: The remote will automatically exit the TV Menu Mode after 10 seconds of inactivity with no buttons being pushed. For RCA, GE, ProScan DBS systems pushing the MENU button will select the highlighted item. The numeric buttons may also be used to select the MENU choice. The ENTER key may also be used to select all menu choices. Note: Not all functions in competitive models and brands of DBS systems may be fully supported. MENU 7 ENTER TV DBS/ CABLE Special notes: 1. [. . . ] warrants that for 90 days from date of purchase, it will replace this product if found to be defective in materials or workmanship. Return it postage prepaid to the Product Exchange Center address for prompt, no charge replacement with a current equivalent. This replacement is Thomson multimedia Inc. 's sole obligation under this warranty. will not be responsible for any incidental or consequential damages or for any loss arising in connection with the use or in ability to use this product. [. . . ]