User manual RED CASTLE RC

[. . . ] N p k ( s a Peapadi (Päikesevari) RC 2 turvahäll sisaldab 3 funktsiooniga Peapatja – see vähendab turvahälli suurust, see pehmendab beebi pead, see kaitseb päikese eest. The RC 2 car seat can be installed with or without the PRIMAFIX base (optional accessory). € Do not continue to use this car seat when used as a reclined cradle once the child can sit unaided. € It is dangerous to place this car seat on a raised surface: for example, on a table… • Do not use the car seat for more than 5 years. [. . . ] A), and with the other hand, simultaneously pull the shoulder straps toward you (fig. IMPORTANT: The safety harness should be tightened firmly but must not restrict the Installing the child in the RC 2 car seat WARNING: NEVER leave a child unattended in his car seat. IMPORTANT: It is recommended that you adjust the length of the harness to the child’s size BEFORE installing the car seat in the car. The harness straps must go through the slots nearest to the child’s shoulders. € Release the harness buckle by pressing on the red button. € Sit your child comfortably in the car seat with his back firmly against the rear of the seat. € Adjust the position of the seat back (see chapter «adjusting the seat back and handle positions»). € Assemble the 2 parts of the buckle together and insert them into the fastener. € Adjust the harness to fit your baby (see chapter on «adjusting the harness»). N p ( i i GB Head hugger (Sun shade) The RC 2 car seat includes a 3 function head hugger – it reduces the car seat size, it cushions the baby’s head, it protects from the sun. The head hugger provides extra comfort when baby is lying down and lateral support for baby’s head ad upper body. As he grows, remove the padding and use it as a simple head hugger and sun shade (unfolds and closes with the zip). Unfolded as sun shade H T T b e t p 1 1 1 I y t e I a I 1 u Folded back A • Adjusting the seat back and handle positions To adjust the seat back: • 22 s d s o Lift up the lever located at the rear of the car seat and choose the position best suited to your baby’s weight: • Adjust the hood as required in order to protect your baby from the sun. € To remove the hood : push down on the plastic attachments at either side of the hood, at the same time pulling the end of the hood upwards. Attaching the apron: • Before attaching the apron, attach the hood (see previous chapter). € Cover the RC 2 car seat with the apron (fig. € Match the velcro straps and the press studs of the apron and the hood with those on the car seat cover. € To remove the apron, detach the velcro and undo the press studs. Do not use the RC 2 car seat apron in the vehicle. In the case of an emergency, this could impede access to the child. Attaching the sun screen • Position the wider part (shown at the top of fig. 24) onto the hood and attach the velcros. [. . . ] Unattached, in the case of an accident, he will be transformed into a “flying object «. Never travel with your own 3 point set belt attached around you and the child. Make sure that all passengers in the vehicle are wearing their seat belts correctly attached. € Do not place heavy objects on the rear window shelf. [. . . ]