User manual REMINGTON H-1095 STEAM HAIRSETTER WITH JUMBO ROLLERS

[. . . ] Close supervision is necessary when this appliance is used by, on, or near children or invalids. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Remington. Never operate this appliance if it has a damaged cord or plug; if it is not working properly; or if it has been dropped, damaged or dropped into water. [. . . ] CLOSELID and plug cord into outlet. Allow unit to heat for approximately 10 minutes. When the ready dot turns dark the rollers are ready to use. If you do not use the vitamin complex, use only 2 teaspoons of water in the reservoir. Do not over fill. Remove a roller from the middle and place the reservoir on the heating post. CLOSELID and plug cord into outlet. Allow unit to heat for approximately 10 minutes. When the ready dot turns dark the rollers are ready to use. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fully fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Never try to defeat this safety feature. Protect & Shine TM HEATED ROLLERS FEATURES: · Hinged lid closes securely so rollers heat evenly. Additional rollers available for you to customize your setter. Maintenance Instructions SAVE THESE INSTRUCTIONS 1. Velvety rollers may be cleaned with a damp cloth and mild detergent or soap. Removable water reservoir may be cleaned with warm water and a mild detergent or soap. Store appliance and cord where they will not be damaged. Do not attempt to repair the appliance yourself. Return to Remington Customer Service. · Removable water reservoir lets you choose steam or regular option. · Thermostatically controlled heating unit evenly heats rollers from the inside out. Rollers will never overheat and damage hair. · Convenient removable water reservoir fits on any post. · A ready-dot on the roller turns from red to black when rollers are ready to use. Protect & Shine TM Steam Hairsetter Get Ready If you are using steam, open the cover and follow step #3 in the Operating Instructions section. CLOSE COVER so the mist that forms during heating will not escape. CLOSE COVER for heating without steam too. Plug cord into outlet. · Allow Protect & ShineTM to heat for about 10 minutes. When the ready-dot turns dark, the rollers are ready to use. Be Kind To Your Hair With Kindness® Clips From Remington ® Kindness ® Clips hold in gentle heat for long-lasting curls. Use with any size, any brand of rollers; Steam, Mist or Dry. Get Set · Hair should be dry or only slightly damp, never wet. For looser curls, put more hair on each roller. · Section hair and place roller at hair ends. Gently wrap the ends of your hair around the roller and then continue to firmly roll the full length of the hair in the direction of desired style. Place a clip over the roller to secure roller. Unplug the unit when done. · Leave rollers in place for about 5 minutes. Each type of hair and hair style requires a different amount of setting. The longer the roller is left in, the more firm the curl. Decide how long you want to keep the rollers in place to get the curl you want. Rollers will remain curling active for 10 minutes. To order clips-see the accessory order form. · Remove rollers when ready, starting with rollers you placed in first. Remove each clip and roller gently. [. . . ] Remington will reimburse all retailers who accept the setter within 90 days from the date of purchase. If you have any questions concerning the money back guarantee, please call 1-800-736-4648. This product is Listed by Underwriters Laboratories, Inc. and bears the mark Questions or Comments: Please call 1-800-736-4648. Products Company L. L. C. 60 Main Street Bridgeport, CT 06604 Remington and Protect &Shine are trademarks of Remington Corporation L. L. C. [. . . ]