User manual REMINGTON KF-20N CARE SETTER

[. . . ] Do not use an extension cord with this appliance. Never block the air openings of the appliance or place it on a soft surface, such as bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, etc. 10. Never drop or insert any object into any opening. [. . . ] · Soft, velvety-smooth surface provides gentle heat transfer. · Custom clips are easy to use and hold rollers in place. · Ring around post indicates cor rect roller placement. Care Setter® Hot Rollers Long and Wavy For long, voluminous, smooth waves, use the large rollers. Roll the top, front layer of hair back to your crown, using one roller. Next, use three other large rollers to roll the remaining hair in three equal sections on the back and sides of the head. Roll the hair under, up the nape of the neck. Leave rollers in place for about five to ten minutes. Unwind, don't pull, remove the rollers out in the order you put them in, and let the curl cool for a minute to set. Lean forward and brush hair through. Toss head back and smooth, brushing top to one side and turning ends under. · Before setting, hair should be dry or only slightly damp, never wet. Plug cord into outlet. When red dot on large roller top turns black, they are ready to use. ROLLERS TAKE APPROXIMATELY 12-14 MINUTES TO HEAT Get Ready · Section hair and comb it smooth. Roll hair as usual, in the direction of desired style. Secure each roller with the correct size clip. FORCURLS:Start end of hair on roller and continue to wind toward the roots. FORMORE VOLUME:Start rolling hair at the roots; and then wrap the end of hair around the roller. Get Set · Once the entire head is set, wait until rollers are cool, then unwind. Start with the rollers you placed in first. The time the roller is left in the hair regulates the curl size:the longer the time, the tighter the curl and the longer the curl will last. Unplug the unit. Rollers will remain curling active for ten minutes. · To release secured roller, remove each clip and roller gently. Unwind, never pull. Let each new curl spring back into position and cool for a moment. Then brush out hair and style. Spritz hair for extra hold. Short and Chic Use two or three of the small sized rollers to roll the top, front layer of your hair back to the crown. Then randomly, place the remaining medium sized rollers around the back and sides of the head, rolling all the curlers under. Leave rollers in place for approximately ten minutes. Unroll curlers in the order that you put them in, let the curl cool for a minute to "set"and then use your fingers to separate and shape. Spritz hair for extra hold. The Flipped Bob Use a large sized roller on a large section of the hair on your crown to give height. Roll the hair back and under towards crown. Next, take large sections all around the sides of your head, and roll up so the hair will flip out. You should roll curlers up to the level of the top of your ear. Leave rollers in place for approximately ten minutes. Unroll curlers in the order that you put them in, let the curl cool for a minute to set. Next, brush hair out, using your hand to shape the flip outward. Spritz for extra hold. Quick Touch-Ups ­ To add some fullness before an evening out, here are some tips: Short Hair: Use a few small sized rollers in the front section of hair, and mist with hairspray. Remove after just 30 seconds to add fullness. Let cool, and separate curls with finger. Medium Hair: Use several medium sized rollers to add more flip to your bob, rolling ends of hair so hair flips out. Mist with hairspray, and remove after about 1 minute. Remove rollers, let cool, and brush hair to smooth. [. . . ] and bears the mark Name _________________________________________________ Address _______________________________________________ City ___________________________________________________ State ________________________ Zip___________________ We must have a street address, as UPS cannot deliver to a P. Questions or comments call 1-800-736-4648 Questions or Comments: Please call 1-800-736-4648. Visit us at http:\\www. remington-products. com 120 VAC 60 Hz Products Company, L. L. C. 60 Main Street Bridgeport, CT 06604 Remington and Care Setter are trademarks of Remington Corporation, L. L. C. [. . . ]