User manual REMINGTON MS3-1700

[. . . ] When using an electric shaver, basic precautions should always be observed, including the following. Read all instructions before using this shaver. How to get a great shave from your Remington ® Titanium MicroScreen® Ultra Thank you for buying this premium shaver from Remington ®. Inside you'll find tips on using and caring for your shaver to get the best shave possible. [. . . ] The brush icon will blink to remind you to clean your shaver. Caution: Do not remove or replace the head assembly while shaver is running as it may cause damage to the unit's screens or cutters. S Worn or damaged parts should be replaced with Remington® replacement parts only. Because they are subject to daily use, the cutters and screens of your Remington® shaver will wear and eventually require replacement to maintain a close, comfortable shave. Depending on your shaving technique and habits, the screens will usually last six months; the cutters, one year. To prevent inadvertent damage to the screen and cutter assembly, do not attempt to remove them unless you are replacing them. To remove the old screens and cutters follow the instructions that come with the screen and cutter, replacement package. It's always a good idea to replace the screens when you replace the cutters. S Do not push downward on the ends of the cutters, as you may bend the cutter, reducing its ability to operate smoothly. S Do not remove cutters from the plastic pieces to which they are attached, as you may damage the assembly. S Remove the shaver head by squeezing on both side buttons and pulling away from the body of the shaver. You may blow out the stubble thoroughly, or rinse the shaver head in water. Important: Never clean the screen with the enclosed brush as damage may occur to the holes in the screen. S At least once a week, the cutters and the trimmer should be cleaned with the cleaning brush. You can also rinse the cutter under running water, like the screen. Caution: Never put the shaver completely under water. Do not use an y aggressive cleansing agent as this may destroy the shaver coatings. S To clean and lubricate your shaver's cutters and head assembly, apply Remington® Shaver Saver ® (SP-4) Lubricant. The lubricant helps remove hair clippings while reducing wear. A quick spray after each shave keeps your shaver operating at peak performance. When is it time to replace your screens and cutters?It is very important to replace your screens and cutters when necessary to insure a close, comfortable shave without irritation. [. . . ] Your shaver has a toggle power button that has different operating characteristics depending on which model shaver you have. You can take your MS3-2700/3700/4700 shaver with you when you travel to just about anywhere in the world. yourshaver features worldwide automatic dual voltage conversion providing AC current between 100-240 volts AC , 50-60 Hz. Just plug it in to the local outlet (you may need an adapter plug) and use as usual. [. . . ]