User manual REMINGTON MSC-100

[. . . ] After each shave, turn the shaver off and remove the head assembly by gripping both sides of the head assembly and pulling up. Be careful not to touch the screens when removing the head assembly. Locate brush on top of the swiveling lid cover and slide out using the ribbed surface to separate the brush from the lid cover. [. . . ] For difficult areas, stretch the skin taut and try a circular motion. Always keep the swiveling protective cover over the head assembly to protect the delicate twin screens. When replacing the head assembly, do not touch the screen. Head assembly should snap back securely. CAUTION: Do not remove or replace the head assembly while the shaver is running, as it may cause damage to the screens or cutters. to avoid possible damage to the cutters , it is not recommended to remove the cutter assem bly. If however the cutter assembly pops off during the cleaning process, it may be easily remounted. Take care not to lose the small spring that is seated on each oscillator tip. The shaver will not operate correctly without the springs. to remount the cutters , turn the cutter assembly so the shape of the hole in the base of the assembly is properly aligned with the shape of the oscillator tip. Place the cutters back into posi tion and press down gently on the center of the cutter. NOTE: Replacement screens and cutters are NOT available for this shaver. On average, screens will have a useful life of anywhere from 5 to 9 months before wear is visible, (depending upon usage). Inspect screens before each use and if there is any visible wear or other damage to the screens, discard the shaver - DO NOT USE. Remington warrants that your product, except as noted below, is, on date of purchase, free from defect in material and workmanship. Remington will correct any such defect without charge if you return the complete product either in person or by mail, postage paid, to a Remington company-owned Service Center or Authorized Service Dealer within 60 days after the date of purchase with original receipt. Do not return this product to the retailer from whom the product was purchased. This warranty does not cover damage by accident, misuse, abuse, or by affixing an unauthorized accessory or alteration to the product, or by connection of the product to any but the specific current and voltage indicated in an accompanying instruction booklet, or by any other conditions beyond our control. [. . . ] If you wish, you may mail the product, postpaid, to Remington Products Company, L. Service under the Remington warranty can be obtained outside the United States by Remington-authorized Distributors and Service Dealers. Please consult your local telephone directory for the nearest location. [. . . ]