User manual REMINGTON R-15 VTR

[. . . ] Use this appliance only for its intended use as is described in this manual. Do not use attachments not recommended by Spectrum Brands, Inc. Keep the cord away from heated surfaces. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. [. . . ] Shaver should be left in cleaning base for 24 hours to allow it to dry for next usage. Solution levels The cleaning solution will slowly evaporate with use. When the solution levels get low, the red replacement indicator light will begin to flash. This means you have enough cleaning solution left for approximately 5 more cleanings. If the red light stops blinking and glows steadily, the unit will not operate until the solution and filter have been replaced. Replacing the Filter and Solution Only Remington's special cleaning solution and filter can be used with the Power Clean System. The cleaning solution contains a high percentage of alcohol and a special oil that lubricates your shaver each time it is cleaned. The filter is specially designed to collect hair debris yet allow for the system to clean your shaver. Remove and discard filter and empty any remaining cleaning solution. Fill with fresh solution, insert new filter and replace upper portion. Wipe off the unit periodically with a damp cloth and remove any hair debris that has collected where the shaver sits. Preparing the System Cleaning solution: 1. The amber indicator light flashes through the entire cleaning cycle, which lasts approximately 2 minutes. When the cleaning cycle has been completed, the amber light will stop blinking and glow steadily. The unit then returns to charging mode. 8 9 30039_R-15 VTR_IB_tri 8/24/06 2:55 PM Page 10 How To Use NOTE: To avoid damage to the cleaning system, use only Remington's special cleaning solution. Remington's replacement solution and filter is model #CC-100. residents: To order, contact us at (800) 231-8793, www. remington-products. com, or visit your local retailer. Canadian residents: For shaver accessories, call (800) 268-0425. Cleaning & Maintenance (without using base) Cleaning your shaver TO ASSURE OPTIMAL PERFORMANCE, IT IS RECOMMENDED THAT YOU CLEAN YOUR SHAVER AFTER EACH USE. Before cleaning, detach the handheld unit from the power supply cord before cleaning. The cutting system of this shaver was designed to be cleaned by rinsing under warm running water or by brushing. Cleaning your Remington® branded shaver is easy. Open the hair pocket by pressing the release button and rotating away from the body of the shaver. You may blow out the stubble thoroughly, or rinse the shaver head in water. [. . . ] This warranty does not include damage to the product resulting from accident or misuse. If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge. Return your product and sales receipt with your name, address and day time phone number to: Spectrum Brands, Inc. , Attention: Consumer Services, 601 Rayovac Drive, Madison, WI 53711. [. . . ]