User manual RICOH AFICIO 350E

[. . . ] 350e/450e OPERATING INSTRUCTIONS COPY REFERENCE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo Telephone: Tokyo 3479-3111 350e/450e OPERATING INSTRUCTIONS Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. [. . . ] In such a case, try turning over the paper stack in the paper tray. If there is no improvement, change to copy paper with less curl. 23 Basics Note Ì When you use the bypass tray, it is recommended to set the copy paper direction to L. 1 Ì Post cards should be fed from the bypass tray. Ì If you load paper of the same size and in the same direction in two or more trays, the machine automatically shifts to another tray when the tray in use runs out of paper. This function is called Auto Tray Switch. (If you put recycled paper or special paper in paper trays using the Special Paper Indicate menu, this function is not available to these trays unless their settings are identical. ) This saves interrupting a copy run to replenish paper even when you make a large number of copies. Paper Ind. " of the System Settings. Reference If you want to add paper, see P. 115 "B Loading Paper". If you want to change the paper size, see P. 128 "Changing the Paper Size". Non-recommended Paper R CAUTION: · Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or equipment failure. Important Ì Do not use paper with any kind of coating such as: · Thermal fax paper · Art paper · Aluminum foil · Carbon paper · Conductive paper Ì Otherwise, a fault might occur. Ì Do not use copy paper that has been already copied on. Otherwise, a fault might occur. Note Ì Do not use the following type of paper because a paper misfeed might occur. 24 · · · · · · · Bent, folded, or creased paper Torn paper Slippery paper Perforated paper Rough paper Thin paper that has low stiffness Paper with much paper dust on its surface Copy Paper Ì If you make a copy on rough grain paper, the copy image might be blurred. Ì Do not use paper which has been copied or printed on. Paper Storage Note Ì When storing paper, the following precautions should always be followed: · Do not store paper where it will be exposed to direct sunlight. · Avoid storing paper in humid areas (humidity: 70% or less). Ì Keep open reams of paper in the package, and store as you would unopened paper. Ì Under high temperature and high humidity, or low temperature and low humidity conditions, store paper in a vinyl bag. 1 25 Basics Toner 1 Handling Toner R WARNING: · Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations for plastics. R CAUTION: · Keep toner (used or unused) and toner containers out of reach of children. R CAUTION: · Our products are engineered to meet high standards of quality and function- ality, and we recommend that you only use the expendable supplies available at an authorized dealer. Important Ì If you use toner other than that recommended, a fault might occur. Reference If you want to add toner, see P. 117 "D Adding Toner". Toner Storage Note Ì When storing toner, the following precautions should always be followed: · · · · Store toner containers in a cool, dry place free from direct sunlight. Do not store toner where it will be exposed to heat. Do not eat or swallow toner, and keep it out of reach of children. Store on a flat surface. Used Toner Note Ì Used toner cannot be re-used. 26 2. Copying Basic Procedure Note Ì As default this machine is initially in Duplex mode (1-sided 2-sided). You can cancel Duplex mode by pressing the {Duplex} key. Duplex Priority" in P. 148 "1. [. . . ] Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. R CAUTION: · Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. R CAUTION: · When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). · When the main switch is in the Stand-by positions, the optional anti-condensation heaters are on. In case of emergency, unplug the machine's power cord. · When you unplug the power cord, the anti-condensation heaters turn off. [. . . ]