User manual RICOH AFICIO AP305

[. . . ] OPERATING INSTRUCTIONS Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo Telephone: Tokyo 3479-3111 RICOH COLOR LASER AP305 OPERATING INSTRUCTIONS Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. [. . . ] The paper tray can support paper 64 ­ 105 g/m2 (17 ­ 28 lb). The bypass tray can support paper 64 ­ 157 g/m2 (17 ­ 42 lb). The optional paper tray can support paper 64 ­ 105 g/m2 (17 ­ 28 lb). 44 Paper Feed Unit Type305 (Tray2/3) × r × × r 5 5 5 × Feed direction Bypass Tray Size (mm) Paper and Other Media Supported by this Printer Precautions for Paper Note the following precautions when handling or selecting paper to be used with this printer. Cautions in loading paper Important Do not use paper that is meant for an inkjet printer. Otherwise, it may stick to the fusing unit and cause a paper misfeed. When printing on an OHP transparency that has a print side, load it with the print side down onto the bypass tray. Otherwise, it may stick to the fusing unit and cause a misfeed. Print quality cannot be guaranteed if other paper types are used. P. 47 "Paper not supported by this printer" Do not use paper that is already printed on. Ì Ì · · 5 Cautions in storing paper Paper should always be stored properly. Improperly stored paper might result in poor print quality, paper misfeeds, or printer damage. · Avoid storing paper in humid areas. · Avoid exposing paper to direct sunlight. · Keep open reams of paper in the package in which the paper came. Paper types and cautions y Plain paper · The standard tray can hold up to 250 sheets. *1 · The bypass tray can hold up to 50 sheets. *1 · The Paper Feed Unit Type305 (option) can hold up to 500 sheets. *1 *1 : Based on paper that is 80 g/m2 (metric version), 20 lb (inch version) in weight. · If paper is curled or bent, correct it before loading. 45 Paper and Other Media y Thick Paper · If you print on paper heavier than 105 g/m2 (28 lb), use the bypass tray. The bypass tray can hold paper up to 157 g/m 2 (42 lb) in weight. The print quality on paper that is thicker cannot be guaranteed. · The bypass tray can hold up to 25 sheets. Note Ì The number of sheets to be set may vary depending on the paper thickness and paper type. · When printing on thick paper, you should select the thick paper mode with the printer driver. y Adhesive labels · When printing on adhesive labels, use the bypass tray. 5 TFWY060E · Load adhesive labels into the tray with the print side down. · Remove any unused adhesive labels from the tray after you are finished printing. Leaving them in the tray can cause them to curl. · When printing on adhesive labels, you should select the plain paper mode with the printer driver. [. . . ] In printing, dithering is usually called halftoning, and shades of gray are called halftones. y Ethernet® A network protocol used by Local Area Networks (LANs). Installing an optional network board in the printer allows it to be connected to a network and serve as a network printer. y Graphics Command Command is for printing lines, circles, ellipses, and other graphics. [. . . ]