User manual RICOH AFICIO GX3000N Quick Start

[. . . ] J007-6603 J0076603 Quick Installation Guide Check the power source. The power requirements of this printer are as follows: 100-120V, 50/60Hz, 1A or more. Read this sheet carefully before you use this product and keep it handy for future reference. For safe and correct use, please be sure to read the Safety Information in the Setup Handbook before using the product. Checking the Computer and Installation Area The area where the printer is to be placed. Choose a flat, stable area to install the printer. Make sure that all four printer legs make firm contact with the surface beneath. · The surface should be level within two degrees, left to right and front to back. [. . . ] Do one of the following: Change the tray. Cancel the print job. To change the tray, see p. 47 "Paper Input Menu". Printing by Form Feed Press the [Form Feed] key, select the tray, and then print by Form Feed. Print: Tray 1 ?: A4 (297 x 210) 106 Troubleshooting Print: Tray Plain Paper 3. Press the [#Enter] key. 1 ?: Canceling the Print Job Cancel the print job. 107 Troubleshooting Paper Size Mismatch/Paper Type Mismatch (Bypass Tray) The tray is not loaded with paper of the correct size or type. Do one of the following: Change the tray. Cancel the print job. To change the tray, see p. 47 "Paper Input Menu". Printing by Form Feed Press the [Form Feed] key, select the tray, and then print by Form Feed. Print: Tray 1 ?: A4 (297 x 210) Print: Tray Plain Paper 3. 1 ?: 108 Troubleshooting Canceling the Print Job Cancel the print job. Press the [#Enter] key. Paper Size Mismatch/Paper Type Mismatch (AutoTray Select) The automatically detected tray is not loaded with paper of the correct size or type. Do one of the following: Change the tray. Cancel the print job. To change the tray, see p. 47 "Paper Input Menu". 109 Troubleshooting Printing by Form Feed Press the [Form Feed] key, select the tray, and then print by Form Feed. Print: Tray 1 ?: A4 (297 x 210) Print: Tray Plain Paper 3. 1 ?: 110 Troubleshooting Canceling the Print Job Cancel the print job. Press the [#Enter] key. Cover Open A cover is open. Close the top cover or duplex unit cover. If the cover is already closed, open and then reclose it. Follow the procedure below to close the top cover or duplex unit cover. If the bypass tray is attached to the printer, detach it. 111 Troubleshooting 1. Close the cover. Check that the duplex unit is correctly attached and the duplex unit cover is closed. p. 20 "Detaching and Reattaching the Multi Bypass Tray (Optional)" Duplex Unit Not Detected The duplex unit is not attached correctly. Follow the procedure below to attach the duplex unit correctly. If the bypass tray is attached to the printer, detach it. 1. Lock the lever for attaching the duplex unit. Even if you are not duplex printing, the duplex unit must be attached. Otherwise printing will not start. p. 20 "Detaching and Reattaching the Multi Bypass Tray (Optional)" 112 Troubleshooting Cover Open / Print Cartridge(s) Not Detected The right front cover is open. [. . . ] Counters show the number of prints made by the machine. Print counter numbers do not include test patterns printed using "Maintenance", system configurations printed using "Test Print", and counter printouts made using "Counter". Making Printer Settings > Incomplete Information Making Printer Settings Using the Control Panel Show Counter · Color: This counter shows the number of color originals printed using the printer driver's [Color] setting. · Black: This counter shows a total that includes the number of black and white originals printed and the number of color originals printed using the printer driver's [Black and White] setting. Print You can print out the machine's counter figures. [. . . ]