User manual RICOH AFICIO 3235C

[. . . ] Operating Instructions Copy Reference Placing Originals Copying Color Adjustment/Program Troubleshooting User Tools (Copier / Document Server Features) Specifications Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in the "General Settings Guide" before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. [. . . ] G Enter the length of [X1] with the number keys, then press [#]. number keys, then press [#]. Specified Area Repeat You can use this function only when you are making a copy from the Exposure Glass. Note The base point X1, Y1, and the length set by point X2, Y2 determines the area of an image repeatedly copied. Limitation You cannot use the specified area repeat from ADF. H Enter the length of [Y1] with the I Enter the length of [X2] with the J Enter the length of the [Y2] by number keys, then press [#]. K Press [OK] three times. L Place the original on the exposure glass, and then press the {Start} } key. GCRE032E 1. Set on the exposure glass 63 Copying Double Copies One original image is copied twice onto one sheet, as shown. Originals with a size of A5KL, B6 JISKL, 51/2" × 81/2"L cannot be detected properly on the exposure glass. Be sure to select the copy paper manually or place the originals in the ADF. Reference Related default settings: 2 p. 120 "Double Copies Separation Line" A Press [Edit / Color Creation]. Note You cannot use the bypass tray with this function. See the following table for original and copy paper sizes and orientations when using a 100% ratio: Metric version Original size and orientation A5L B6 JISL A4K A5K B5 JISK B6 JISK Copy paper size and orientation A4K B5 JISK A3L A4L B4 JISL B5 JISL B Press [Edit Image]. F Place the originals, and then press the {Start} key. } Centring You can make copies with the image moved to the center. Inch version Original size and orientation 51/2" × 81/2"L 51/2" × 81/2"K 81/2" × 11"K Copy paper size and orientation 81/2" × 11"K 81/2" × 11"L 11" × 17"L GCCNTR0E 64 Copier Functions Note You cannot use the bypass tray with this function. Original sizes and orientations for centring are listed below. Positive / Negative If your original is black and white, copy images are inverted. Metric version Original Original size and orientation placed on: Exposure glass ADF A3L, B4 JISL, A4KL, B5 JISKL A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISKL, 11" × 17"L, 81/2" × 11"KL 2 GCHATN1E Inch version Original size and orientation Original placed on: Exposure glass ADF 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL A3L, A4KL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"K, 51/2" × 81/2"KL, 10" × 14"L A Select the paper. B Press [Edit / Color Creation]. Note If your original is black and white, copy images are inverted. If your original is color, the density, darkness and brightness of each color will be reversed and inverted to complimentary colors. If the {Single Color} key is selected, } copy images are copied in white and specified colors. If [Two-color] (normal) is selected, the white part of the original becomes black and the black part becomes white, and the colored part is copied with the specified color. If [Red & Black] is selected, the white part of the original becomes black, the black part and the red part becomes white, and the blue part becomes red in color. A Press [Edit / Color Creation]. F Place the originals, and then press the {Start} key. } 65 Copying 2 B Press [Edit Image]. F Place the originals, and then press the {Start} key. } Erase You can erase the center and/or all four sides of the original image. This function has three modes: Border Erases the original's edge margin from the copy. Mirror Copies by reversing the image from left to right, as reflected in a mirror. GCCENT2E GCMILL1J Center Erases the original's center margin from the copy. A Press [Edit / Color Creation]. E Place the originals, then press the {Start} key. } GCCENT1E 66 Copier Functions Center/Border Erases both the original's center and edge margins from the copy. Border Erase A Press [Edit / Color Creation]. 2 GCCENT3E Reference The erase width is set to 10 mm (0. 4") as default. [. . . ] · If the calculated ratio is under the minimum ratio, it is automatically adjusted to within acceptable range. However, with some ratios, parts of the image might not be copied. · If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly. · You cannot copy with originals different in size and orientation. [. . . ]