User manual RICOH AFICIO 3232C

[. . . ] Operating Instructions Copy Reference Placing Originals Copying Color Adjustment/Program Troubleshooting User Tools (Copier / Document Server Features) Specifications Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in the "General Settings Guide" before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. [. . . ] Limitation You cannot use the specified area repeat from ADF. H Enter the length of [Y1] with the number keys, then press [#]. number keys, then press [#]. I Enter the length of [X2] with the J Enter the length of the [Y2] by number keys, then press [#]. K Press [OK] three times. L Place the original on the exposure glass, and then press the {Start} } key. 2 Double Copies One original image is copied twice onto one sheet, as shown. GCRE032E 1. Set on the exposure glass A Specify the location of the area's base point (X1, Y1), and its length and width (X2, Y2). Note You can set any value in the range of X1: 0~412mm ( 0" ~ 1 6 . 2 " ) , X 2 : 20 ~ 4 3 2 m m (0. 8"~17. 0"), Y1: 0~277mm (0"~10. 8"), and Y2: 20~297mm (0. 8"~11. 6"). B Select the size of the copy paper and the reproduction ratio. Note You cannot use the bypass tray with this function. See the following table for original and copy paper sizes and orientations when using a 100% ratio: C Press [Edit / Color Creation]. G Enter the length of [X1] with the number keys, then press [#]. Metric version Original size and orientation A5L A4K A5K B5 JISK Copy paper size and orientation A4K A3L A4L B4 JISL 59 Copying Inch version Original size and orientation 51/2" × 81/2"L 51/2" × 81/2"K Copy paper size and orientation 81/2" × 11"K 81/2" × 11"L 11" × 17"L Centring You can make copies with the image moved to the center. 2 81/2" × 11"K Originals with a size of A5KL, B6 JISKL, 51/2" × 81/2"L cannot be detected properly on the exposure glass. Be sure to select the copy paper manually or place the originals in the ADF. GCCNTR0E Reference Related default settings: p. 115 "Double Copies Separation Line" A Press [Edit / Color Creation]. Note You cannot use the bypass tray with this function. Original sizes and orientations for centring are listed below. Metric version Original Original size and orientation placed on: Exposure glass ADF A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 13"L A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 81/2" × 13"L B Press [Edit Image]. F Place the originals, and then press the {Start} key. } Inch version Original size and orientation Original placed on: Exposure glass ADF 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"KL, 10" × 14"L 60 Copier Functions A Select the paper. B Press [Edit / Color Creation]. If [Two-color] (normal) is selected, the white part of the original becomes black and the black part becomes white, and the colored part is copied with the specified color. If [Red & Black] is selected, the white part of the original becomes black, the black part and the red part becomes white, and the blue part becomes red in color. 2 C Press [Edit Image]. F Place the originals, and then press the {Start} key. } A Press [Edit / Color Creation]. Positive / Negative If your original is black and white, copy images are inverted. B Press [Edit Image]. F Place the originals, and then press the {Start} key. } Mirror GCHATN1E Copies by reversing the image from left to right, as reflected in a mirror. Note If your original is black and white, copy images are inverted. If your original is color, the density, darkness and brightness of each color will be reversed and inverted to complimentary colors. If the {Single Color} key is selected, } copy images are copied in white and specified colors. GCMILL1J 61 Copying Note Copy results may differ depending on the set orientation of the originals. Center/Border Erases both the original's center and edge margins from the copy. 2 A Press [Edit / Color Creation]. E Place the originals, then press the {Start} key. } GCCENT3E Erase You can erase the center and/or all four sides of the original image. This function has three modes: Reference The erase width is set to 10 mm (0. 4") as default. [. . . ] However, with some ratios, parts of the image might not be copied. · If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly. · You cannot copy with originals different in size and orientation. · If the number of originals scanned is less than a multiple of 4, the last page is copied blank. [. . . ]