User manual RICOH AFICIO MP 1100 POSTSCRIPT SUPPLEMENT

[. . . ] PostScript 3 Supplement 1 2 3 4 Windows Configuration Mac OS Configuration Using PostScript 3 Printer Utility for Mac Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in "About This Machine" before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. [. . . ] E Click the printer you want to use, and then click [Setup]. A PPD file is set up and the Adobe PS icon appears at the left of the printer name in the list. Follow the procedure on p. 56 "Setting Up Options" to make option settings; otherwise close the [Chooser] dialog box. Setting Up Options A On the [Apple] menu, click [Chooser]. C In the [Select a PostScript Printer:] list, click the name of the printer you want to use, and then click [Setup]. D Click [Configure]. A list of options appears. E Select the option you want to set up, and then select an appropriate setting for it. F Click [OK]. The list of options closes. G Click [OK]. The [Chooser] dialog box appears. H Close the [Chooser] dialog box. Note If the option you want to select is not displayed, PPD files may not be set up correctly. To complete the setup, check the name of the PPD file displayed in the dialog box. 56 Mac OS Installing Adobe Type Manager Important Quit all applications currently running before installation. Install ATM after you restart the computer. A Start a Mac OS. B Insert the CD-ROM into the CD-ROM drive. D Double-click the [Mac OS 8 and 9] folder. F Double-click the ATM 4. 6. 2 installer icon. G Follow the instructions on the screen. H When the procedure is complete, restart the computer. ATM will be completely installed only after restarting. 2 I On the [Apple] menu, open [Control Panel], and then click [~ATM]. J The ATM control panel opens. Note For details about installation, see the operating instructions in the ATM folder. Installing Screen fonts Follow the procedure below to install screen fonts. The screen fonts described below can be found in the [Fonts] folder on the CD-ROM. A Start a Mac OS. B Insert the CD-ROM into the CD-ROM drive. The CD-ROM drive icon appears. C Double-click the CD-ROM drive icon. The contents of the CD-ROM appear. D Double-click the [Mac OS 8 and 9] folder. F Double-click the [Screen font] folder. G Double-click the [TrueType] or [Type1] folder. Select the font type you want to use. 57 Mac OS Configuration H Copy the fonts you want to install in [System Folder]. A confirmation message appears. I Click [OK]. The fonts are installed. J Restart the Mac OS. 2 Changing to EtherTalk Follow the procedure below to configure to a Mac OS to use EtherTalk. A Open [Control Panel], and then double-click the AppleTalk icon. B On the [Connect via:] pop-up menu, click [Ethernet]. C If you change zones, select a name on the [Current zone:] pop-up menu. E Restart the computer. Note The procedures used to configure Mac OS may vary depending on the Mac OS version. The following describes how to configure Mac OS 9. 1. If you are using a different version of Mac OS, use the following procedures as a reference and see the manuals for your Mac OS version. [. . . ] B In the [New Name:] filed enter a new name. C Click [Rename]. The printer name is changed. D Click [OK]. E On the [Printer Utility for Mac] menu, click [Choose Printer. . . ]. F In the [Available Network Zones:] list, select the zone for the Macintosh in use. [. . . ]