User manual RICOH AFICIO SP C240DN

[. . . ] Operating Instructions Hardware Guide 1 2 3 4 5 6 7 8 9 10 Guide to the Printer Installing the Printer and Options Connecting the Printer Configuration Paper and Other Media Replacing Consumables Cleaning the Printer Troubleshooting Removing Misfed Paper Appendix Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read "Safety Information" before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. [. . . ] Press the [ ] or [ ] key to select a unit, and then press the [OK] key. Press the [ ] or [ ] key to enter the horizontal value, and then press the [OK] key. Press the [ ] or [ ] key to enter the vertical value, and then press the [OK] key. € For details about the printer driver, see the printer driver Help. Specifying a paper type for the bypass tray By selecting the paper type you want to load, the printer performs better. You can select from the following paper types: • [Thin Paper], [Plain Paper], [Middle Thick], [Thick Paper 1], [Recycled Paper], [Color Paper], [Preprinted], [Prepunched], [Letterhead] 88 Loading Paper • When you specify the bypass tray as the input tray on the printer driver, and perform printing, if you set [Bypass Priority] to [Any Size/Type] under [Paper Input] on the control panel, the printer ignores the paper type and size settings made on the control panel. Printing is performed with the settings made on the printer driver. € When you specify a custom size paper and specify the bypass tray as the input tray on the printer driver, and perform printing with [Bypass Priority] set to [Any Custom S/T] under [Paper Input] on the control panel, the printer ignores the paper type and size settings made on the control panel. Printing is performed with the settings made on the printer driver. € If you set [Bypass Priority] to [Machine Setting] under [Paper Input], paper type settings made on the printer driver must match those made on the control panel. If they do not match, an error message appears and printing stops if [Auto Continue] is not set to [On] under [System]. Press the [ ] or [ ] key to display [Paper Input], and then press the [OK] key. Press the [ ] or [ ] key to display [Paper Type], and then press the [OK] key. Press the [ ] or [ ] key to display [Bypass Tray], and then press the [OK] key. Press the [ ] or [ ] key to select the paper type, and then press the [OK] key. Paper and Other Media Loading Paper in Tray 2 The following example explains the loading procedure for Tray 2. € Before printing on paper other than envelopes, make sure that the fusing unit levers inside the front cover are pulled up. Leaving the levers lowered can cause print quality problems when printing on paper other than envelopes. € Make sure paper is not stacked above the limit mark inside the tray. € After loading paper in the tray, specify the paper type and size using the control panel to avoid printing problems. This machine does not detect the paper size automatically. € Do not mix different types of paper in the same paper tray. [. . . ] We recommend keeping a stock of bottles or purchasing them soon. Appendix Specifications • The supplied power cord is for use with this equipment only. Doing so may result in fire, electric shock, or injury. Main Unit Configuration Desktop Print Process Laser beam scanning & Electrophotographic printing 4 drums tandem method First Print Speed Monochrome: 14 sec or less (A4 /8 1/2 × 11 ) Color: 14 sec or less (A4 /8 1/2 × 11 ) • If the printer has not been used for a while, there may be a short delay before the first page starts printing. [. . . ]