User manual RICOH AP505

[. . . ] OPERATING INSTRUCTIONS Printer Reference Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo Telephone: Tokyo 3479-3111 RICOH COLOR LASER AP505 OPERATING INSTRUCTIONS Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. [. . . ] Align the printer onto the 4 upright pins on the paper feed unit and then lower it gently. 2 TFWP060E F Pull out the paper tray, and remove the padding. moved in step B. TFWP100E J Connect all of cables that were reK Plug the printer's power cord back into the printer and the wall socket. Turn on the printer's power switch. firm that the paper feed unit is properly installed. TFWP070E L Print a configuration page to conReference For more information on the configuration page, see the "Getting Started". Note Ì If the paper feed unit doesn't work, follow the above instructions to reinstall it. If it still doesn't work, contact your sales or service representative. Important Ì To make the printer recognize the installed option properly, you must set up the option with the printer driver. See the "User's Guide" for further details. G Remove the ring attached to the red tag. TFWP061E H If installing two paper feed units, place one paper feed unit on the other paper feed unit at first. If installing only one paper feed unit, go to step I. Align the paper feed unit onto the 4 upright pins on the other paper feed unit. Ì After installing the paper feed unit properly, set up the paper size. P. 25 "Loading Paper" 14 3. Paper and Other Media Paper and Other Media Supported by this Printer Paper Types and Sizes This section provides the type, size, feed direction, and maximum capacity of paper that can be loaded into each paper tray in this printer. Ì Ì Ì Ì Note The "K" symbol means short-edge feed direction. The "L" symbol means long-edge feed direction. The paper feed direction depends on the paper size. This printer can automatically switch to 81/2"×11" (Letter) size paper if there is no A4 size paper available, and vice-versa. For example, if the printer has no A4 size paper when you want to print on A4, the printer searches for 81/2"×11" (Letter) size paper and prints on that instead. 15 Paper and Other Media y Paper Sizes (Metric version) Standard Tray (Tray 1) 3 13" × 18" 12" × 18" A3 B4 JIS A4 K K K K K L 330 × 457 305 × 457 297 × 420 257 × 364 210 × 297 297 × 210 182 × 257 257 × 182 148 × 210 210 × 148 128 × 182 105 × 148 279 × 432 216 × 356 216 × 279 279 × 216 216 × 140 140 × 216 184 × 276 276 × 184 210 × 330 216 × 330 203 × 330 6 6 6 6 × 6 *1 × 6 × 6 r 6 6 6 × 6 × 6 × 6 6 6 6 r 5 r 5 *1 × r × 5 × r × × 5 5 × r × 5 × 5 5 r 5 B5 JIS K L A5 K L B6 JIS A6 Double Letter (DLT, 11" × 17") Legal (LG, 81/2" × 14") Letter (LT, 81/2" × 11") Half Letter (HLT, 51/2" × 81/2") Executive (Exec. , 7 /4" × 10 /2") 1 1 K K K K K L K L K L K K K Folio (81/4" × 13") Foolscap (F4, 81/2" × 13") F/GL (8" × 13") *1 :Default setting for "p" on the dial. P. 26 "Specifying paper size using the operation panel" 16 Paper Feed Unit Type305 (Tray 2/3) × × r 5 × r × 5 × × × × r r × r × × × r 5 5 *1 5 Feed direction Bypass Tray Size (mm) Paper and Other Media Supported by this Printer · 6 means that the size is supported and needs to specify the paper size using the operation panel. (Regarding the bypass tray, there is no dial on the tray. ) P. 27 "Loading Paper in the Bypass Tray" · r means that the size is supported and indicated on the tray dial. Be sure to set the paper size dial to match the actual paper size loaded in the tray. · 5 means that the size is supported but not indicated on the paper size dial. You should set the paper size dial to "p", and specify the paper size using the operation panel. [. . . ] · If you dispose of the used toner containers yourself, dispose of them according to your local regulations. R CAUTION: · When accessing the inside of the TFWX250E machine, do not touch any sections other than those specified in this manual. If you do, it might result in receiving a burn or injury. Note Ì Before removing the waste toner bottle from the printer, spread paper or some other material around the area you are working to keep toner from making floor dirty. D Replace the waste toner bottle . A Grasping the waste toner bottle by its green tabs, remove it from the printer. TFWX330E 53 Troubleshooting B Insert a new waste toner bottle at the rear of the photoconductor unit. Insert a new waste toner bottle completely. Otherwise, print problem may occur. TFWX460E 4 TFWX340E Note Ì Return the charger cleaner to the left side. [. . . ]