User manual RICOH PRIPORT DD 4450

[. . . ] Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses. [. . . ] D Enter the number of prints with the number keys. The default is Letter mode. Moire patterns may occur when you are printing from screened originals. When using Photo mode to print originals with both text and photographs, the text might appear faint. To avoid this, use Letter/Photo mode instead. ZLKS032E 40 Type of Original E Press the {Master Making} key. 1 ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". 41 Operation Economy Mode Use this function to save ink. 1 D Press the {Master Making} key. Note Prints will appear lighter when Economy mode is used. The default is Off. To select either "On" or "Off" for Economy mode, see "4 Eco. Mode ON/OFF" on p. 82 "3 Initial Setting". A Press the {Economy Mode} key. ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". BQZ007S B Set your original. C Enter the number of prints with the number keys. Economy mode and Fine mode cannot be used together. If you select both modes together, Economy mode will be the mode that is applied. ZLKS032E 42 Auto Cycle Auto Cycle Use this function to process masters and make prints in a single operation. Note The default is On. You can specify whether Auto Cycle mode is enabled or not when the power is turned on. F If you are using the optional tape Note Repeat Steps C to D as desired. dispenser, turn on the tape dispenser switch. ZLKS052E B Use the {~}{}} keys to select Class, and then press the {OK} key. On Off TSLP013E C With the number keys, enter the desired number of prints, and the press the {q} key. Note The optional tape dispenser automatically feeds out strips of paper to separate each group of prints. G Set your original. 52 Class Mode H Press the {Master Making} key. 1 ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". 53 Operation Recall 1 Note You can store up to 10 entries for Memory mode with each entry containing settings for up to 30 originals (Normal Memory mode), or settings for up to 30 classes (Stack Memory mode). C Use the {~}{}} keys to select 8 Prog. /Change:Mem. , and then press the {OK} key. You can store up to 10 entries for Class mode with each entry containing settings for up to 24 combinations of classes and numbers of prints. D Use the {~}{}} keys to select a number, and then press the {OK} key. Storing Memory Mode Settings Storing Normal Memory Mode Settings Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. Otherwise press the {Escape} key to return to the previous display, and then select another number. A Press the {User Tools} key. E With the number keys, enter the BQZ008S number of prints for each original, and then press the {q} key. B Use the {~}{}} keys to select 3 Initial Setting, and then press the {OK} key. Note Repeat Steps D and E to register all your originals. F Press the {OK} key. G Press the {Clear Modes/Energy Sav- er} key. The contents that you have stored are now effective. 54 Recall Storing Stack Memory Mode Settings Limitation To use Stack Memory mode, you need to first set Memory Mode to "Stack" using the user tools. See "13 Memory Mode" on p. 83 "4 Mode Setting". D Use the {~}{}} keys to select a number, and then press the {OK} key. 1 Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. Otherwise press the {Escape} key to return to the previous display, and then select another number. A Press the {User Tools} key. E With the number keys, enter the BQZ008S number of prints for each class, and then press the {q} key. B Use the {~}{}} keys to select 3 Initial Setting, and then press the {OK} key. Note Repeat Steps D and E to register all your classes. C Use the {~}{}} keys to select 8 Prog. /Change:Mem. , and then press the {OK} key. F Press the {OK} key. G Press the {Clear Modes/Energy Sav- er} key. The contents that you have stored are now effective. 55 Operation Storing Class Mode Settings E With the number keys, enter the 1 A Press the {User Tools} key. number of prints, and then press the {q} key. F With the number keys, enter the number of classes, and then press the {q} key. BQZ008S B Use the {~}{}} keys to select 3 Initial Setting, and then press the {OK} key. Note Repeat Steps D to F to register all your classes. C Use the {~}{}} keys to select 7 G Press the {OK} key. H Press the {Clear Modes/Energy Sav- Prog. /Change:Clss, and then press the {OK} key. er} key. The contents that you have stored are now effective. D Use the {~}{}} keys to select a number, and then press the {OK} key. 56 Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. [. . . ] (Sudden temperature changes might cause condensation within the machine. ) · Places where the machine might be subjected to frequent strong vibration. · Areas with corrosive gases. 130 Where to Put the Machine Power Connection R WARNING: · Connect the power cord directly into a wall outlet and never use an extension cord. · Only connect the machine to the power source describe in the manual. · Do not damage, break or make any modifications to the power cord. Do not pull it hard nor bend it more than necessary. [. . . ]