User manual RICOH THETA X

[. . . ] 9 Mode button Switches the shooting mode. Runs and terminates the installed plug-ins when pressed and held. 0 USB terminal (USB Type-C) Connects with other devices via the provided USB cable. a Microphone B Camera status lamp Lights when shooting can be performed. [. . . ] Then the LCD panel shows how to operate on the shooting, setting, and playback screens and how to connect the camera to a smartphone. If [Auto] is set in the date and time setting, the date and time of the camera is synchronized with those of the smartphone when the camera is connected to the basic app for smartphone. When the initial settings are complete, the shooting screen appears. Swipe from the edge of the LCD panel while the shooting screen is displayed to switch the screen. Swipe the bar at the edge of each screen toward the center to return to the shooting screen. The panel display returns to the shooting screen also when the shutter button is pressed. 1 Wireless LAN communication status 2 Bluetooth® 3 Position information 4 Remote control 5 Plug-in 6 Memory card 7 Battery level 8 Self-timer 9 Shooting mode 0 Exposure program For 8, 9, and 0, you can make settings by tapping them. You can capture and play back images with this camera alone, but furthermore, you can use a smartphone app to shoot, view, and share images from your smartphone. Download the basic app that is compatible with your smartphone. You can use the Bluetooth® function to connect the camera to a smartphone via a wireless LAN. 1 Turn the power on, and then tap era setting screen. 2 Turn on the Bluetooth® and WiFiTM functions of the smartphone. 4 Tap on the screen of the basic app, and then Select the SSID of this camera in the network list of the Wi-FiTM settings on the smartphone, and then enter the password. The serial number printed on the bottom of the camera is the same as the SSID and password. OSC in this case) You can change the password from the smart- Off and back on on the camera setting 2 Check that the camera is not connected to an other wireless LAN such as a public WiFiTM net work. 4 Turn off the power of the camera, restart the ba sic app for smartphone, and then turn the power on again. You can connect the camera to a wireless router in the client mode. 1 Select [SSID] in [Client mode] on the camera set ting screen, and then enter the password. You can switch the shooting mode by tapping or on the shooting screen. Alternatively, press the mode button on the side to switch the shooting mode. You can shoot still images and videos from the camera or smartphone. To shoot still images and videos using the camera, press the shutter button. [. . . ] In addition to the pre-installed plug-ins, you can add new plug-ins. When the connection is established in the client mode, you can install plug-ins on the plug-in selection screen. For details on the plug-in, refer to the user guide.  Facebook, the Facebook logo, and "f" logo are trademarks or registered trademarks of Facebook, Inc. [. . . ]